You asked: What does the Extrude feature do in Solidworks?

What is the use of extrude feature?

About the Extrude Feature. In Assembly mode, you can only create a solid cut, surface, or surface trim. There are several ways to activate the Extrude tool: Click Model > Extrude and create a sketch to extrude.

What is extrude in Solidworks?

You can extrude base features and other features using Convert to Extrusion (2D to 3D toolbar) with partial sketches. Extruded Boss/Base on the Features toolbar accepts only complete sketches. To extrude a feature: Edit a sketch.

What is the use of extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

What does the boss extrude feature do?

An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension.

What means Extrude?

transitive verb. : to force, press, or push out. intransitive verb. : to become extruded.

What are the options used in Extrude to define depth?

Blind—Extrudes a section from the sketching plane to the specified depth value. Specifying a negative depth value flips the depth direction. Symmetric—Extrudes a section on each side of the sketching plane by half of the specified depth value. To Next—Extrudes a section to the next surface of a solid.

How do you draw extrude in Solidworks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you extrude cuts in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you edit extrude in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

Can an open sketch be extruded in Solidworks?

Allows you to use a partial sketch to create extrude features from open or closed contours. Select sketch contours and model edges in the graphics area.

What is blind in Solidworks?

Blind: Defines the distance or length extrusion with a numerical value. Through All: Through the entire extent of the geometry. Up to Next: Extends the extrusion through the bounding box of your model.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.