You asked: How do I make something in Revit?

How do you create something in Revit?

10 Quick Steps to Building a Residential House in Revit

1. Import / Setup your Topography.
2. Place your building Pads to setup the ground slabs.
3. Construct your ground level walls.
4. Introduce your second floor slab with cantilevers.
5. Construct the upper storey walls.
6. Add in Columns and Structural Walls.

How do I create a model in Revit?

Create a Model

1. On the Home page, under Models, click New. As an alternative, from the ribbon, click File tab New (Project).
2. In the New Project dialog, under Template file, do one of the following: Select a template from the list. …
3. For Create new, click Project.
4. Click OK.

How do you create parts in Revit?

Click Modify tab Create panel (Create Parts). In the drawing area, select the elements from which you want to create parts. Only elements that are eligible for part creation will be selectable when the tool is active; ineligible elements display in half-tone. Press Enter or the Spacebar to complete the action.

How do you create a section box in Revit?

Select elements in the view, and then on the Modify tab, click Selection Box. The elements in the extension define the extents of the section box. The selection box tool can be used in 2D view. When used in a 2D view, the section box is applied to the default 3D view of the project.

How do you create a extrusion in Revit 2021?

Create an Extrusion

1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
2. Use the sketching tools to sketch the extrusion profile: …
3. On the Properties palette, specify the extrusion properties: …
4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
5. To view the extrusion, open a 3D view.