When adding notes Hole callouts center marks and centerlines for a Solidworks drawing which tab do you use?

How do you add center marks in Solidworks drawings?

Inserting Center Marks Automatically

1. Click Center Mark. (Annotation toolbar) or Insert > Annotations > Center Mark. …
2. Under Auto Insert, select one or more: For all holes. …
3. Set the options for the auto insert choices.
4. Set the remaining options in the Center Mark PropertyManager.
5. Select one or more drawing views.
6. Click .

How do you do a hole callout in Solidworks?

To add a hole callout:

1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
3. Edit the callout in the Dimension PropertyManager. …
4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

How do you show centerlines in Solidworks drawings?

Centerline Annotations

1. In a drawing document, click Options , Document Properties, Detailing.
2. Under Auto insert on view creation, select Centerlines.
3. Click OK.
4. Insert a drawing view. Centerlines appear automatically in all appropriate features.

What is center Mark in Solidworks?

Center marks are annotations that mark circle or arc centers and describe the geometry size on the drawing. With the Center Mark tool, you can create a center mark or a center point on circular edges. The center mark lines can be used as references for dimensioning.

How do you center a slot in Solidworks?

To place a center mark in a sketch:

1. Click Center Mark (Annotations toolbar).
2. Under Manual Insert Options, select Slot center mark.
3. Select other options for the center mark type.
4. In the graphics area, select an arc or curved edge of a slot and click .

How do I change the center of a mark in Solidworks?

To select a center mark set, right-click one of the center marks in the set and click Select Center Mark Set. Edit the center mark properties in the Center Mark PropertyManager. You can also drag the extended lines to resize them.

What are hole callouts?

The Hole Callout tool adds driven diameter dimensions to holes created by the Hole Wizard or circular cut features. Best results are obtained by creating holes using the Hole Wizard. Hole callouts are available in drawings. If you change a hole dimension in the model, the callout updates automatically.

How do you show threaded holes in Solidworks?

To get there go to Tools > Options > Document Properties . In the Detailing section, there are two options that need to be selected, ‘Cosmetic threads’ and ‘Display annotations’. If you are looking to add a shaded view of cosmetic threads in the hole, the option ‘Shaded cosmetic threads’ will also need to be selected.

What is centerline in drawing?

Center lines denote a circular feature such as a shaft or a hole. A rectangular feature seen on an elevation of a drawing could be identified either as a circular feature or a rectangular feature. The center line is the method of quickly identifying the shape.

How do I turn on centerlines in Solidworks?

In a drawing document, click Options > Document Properties > Detailing. Under Auto insert on view creation, select Centerlines. Click OK.

How do I draw a center line in a circle in Solidworks?

To create a centerline:

1. Click Centerline. (Sketch toolbar) or click Tools > Sketch Entities > Centerline.
2. Click to start the centerline.
3. Drag, or move the pointer and click, to set the end of the centerline.

How do I remove a center mark in a Solidworks drawing?

Select Detailing from the Document Properties tab. Under Auto insert on view creation, select or clear the check box for: Center marks – holes -part.

…

Under Center marks:

1. Enter a value for Size. …
2. Enter a value for Gap. …
3. Select or clear the check boxes for Scale by view scale, Extended lines, and Centerline font.