How do you create a cut out view in Solidworks?

How do you create a cutaway view in Solidworks?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. …
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

How do I create a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned.

1. Click Layout tab Create View panel Section drop-down Full. …
2. Click the view you want to use as the parent view. …
3. Click in the drawing area to indicate the start point of the section line.

How do I create a partial section view in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

What is a half section view?

A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do I cut a part into two parts in Solidworks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options. …
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save. …
5. Click .

Can you split a part in Solidworks?

Use the Split feature to create multiple parts from an existing part. You can create separate part files, and form an assembly from the new parts. You can split one or more solid or surface bodies.

How do you use surface trim?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type: