What is a broken out section Solidworks?

What is a broken-out section?

A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the broken-out section.

How do you delete a broken section in Solidworks?

To delete or edit a broken-out section:

1. Right-click the broken-out section in the FeatureManager design tree and select one of the following.
2. Delete.
3. Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .
4. Edit Sketch. Select the sketch entity and edit it, then close the sketch.

What is a aligned section view in Solidworks?

The aligned section view is similar to a Section View , but the section line for an aligned section comprises two or more lines connected at an angle. The aligned section rotates the cut into the plane of the selected segment.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do I edit a broken view in Solidworks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them. To modify a broken view: To change the shape of the break lines, right-click a break line and select a style from the shortcut menu.

What is full section?

Full sections.



This is the most common section (called a full section) with the imaginary laser cutting a line across the entire construction, offering a view of a portion of the building with the rest of it put to one side.

Why is it the material is removed in broken-out section?

Material is removed to a specified depth to expose inner details. Specify the depth by setting a number or by selecting geometry in a drawing view. If you create a broken-out section of an exploded view, you cannot collapse the exploded view.

What is offset section?

What is an offset section? An offset section is produced by bending the cutting plane to show features that don’t lie in the same plane.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What is an aligned section view?

An aligned section view is drawn as if the cutting plane line ran straight across the object. The cutting plane line is rotated into a straight position, and the section view is projected.

How do you make an angled section view in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do you identify a section view?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.

When and why is a section view necessary?

In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.