Question: How do you edit a cut extrude in SolidWorks?

How do I edit a shape in Solidworks?

Click Edit > Definition. Right-click a feature in the FeatureManager design tree or the graphics area and select Edit Feature from the context toolbar.

How do I change the extrusion dimension in Solidworks?

To change the geometry of a boss-extrusion you should either:

1. RMB – EDIT FEATURE.
2. RMB – EDIT SKETCH. or.
3. Double click on the feature. The dimensions show up. Double click on each dimension to change.

How do you change depth in Solidworks?

To change the depth of the feature, type a new value in the Depth box, or use the arrows to change the value. To remove drafts from the feature, select the Modify Draft check box. Make sure the Extrude with Draft check box is cleared.

How do you extrude a cut in Solidworks?

You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create the 3D model feature.

How do you edit cut extrude?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you delete something in Solidworks?

To delete an item:

1. Select one or more items to delete in the graphics area or in the FeatureManager design tree.
2. Click Delete (Standard toolbar), click Edit > Delete or press Delete.

How do I edit a dimension in Solidworks?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box.

How do I change counterbore depth in Solidworks?

To change the dimensions of the countersink, you should specify Countersink during Find. For Tap holes and PipeTap holes, you can change the Depth, Tap Drill Diameter & Angle, and Thread Depth. For Legacy holes, you can change the parameters that are appropriate to the type of hole you specify during Find.

How do you show depth in Solidworks?

Section Depth

1. Set a value for Depth. .
2. Select geometry, such as an edge or an axis, in the parent view for Depth Reference. .
3. Drag the pink section plane in the graphics area to set the depth of the cut. All components between the section line and section plane will be shown in the section view.

How do you remove cut Extrude in SolidWorks?

Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces. The green area is the face defining the extrude.