What is Psltscale in AutoCAD?

PSLTSCALE. This variable controls the linetype scaling of geometry displayed in paper space viewports – Paper Space Line Type Scale. This variable only has two settings. Setting ‘PSLTSCALE’ to 0 (Off) will mean that the linetype scale factor of your modelspace geometry will not be effected by the scale of your viewport …

How do I fix Ltscale in AutoCAD?

To set the linetype scale at the keyboard, follow these steps:

1. Type LTSCALE (or LTS) and press Enter. AutoCAD responds with a prompt, asking you for the scale factor. …
2. Type the value you want for the linetype scale and press Enter. The easiest choice is to set the linetype scale to the drawing scale factor.

What should Ltscale be set to?

For all your LAYOUT TABS, the LTSCALE should be set to 1. This way, the Linetypes in All of your viewport windows should look the same no matter what scale they are set at.

What is the purpose of Ltscale command?

Use LTSCALE to change the scale factor of linetypes for all objects in a drawing. Changing the linetype scale factor causes the drawing to be regenerated.

How does linetype scale work in AutoCAD?

To set the linetype scale at the keyboard, follow these steps:

1. Type LTSCALE (or LTS) and press Enter. AutoCAD responds with a prompt, asking you for the scale factor. …
2. Type the value you want for the linetype scale and press Enter. The easiest choice is to set the linetype scale to the drawing scale factor.

What is Lineweight AutoCAD?

Lineweight is a property assigned to graphical objects, hatches, leader lines, and dimension geometry that results in thicker, darker lines. The current lineweight is assigned to all new objects until you make another lineweight current.

Why is my Linetype not changing in AutoCAD?

FAQ: Why doesn’t the change I made to linetype display in the drawing? If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.

How do I use Dimscale in AutoCAD?

Then, you would multiply both sides by 8 to get 1″=96″. The DIMSCALE is the number on the right side. For a 1/8″=1′ drawing, you use a DIMSCALE of 96. For a 1″=20′ site plan, you would convert the 20′ to inches and get 1″=240″, resulting in a DIMSCALE of 240.
…
How to Set DIMSCALE.

What is select command AutoCAD?

Selects all objects completely inside a rectangle defined by two points. Specifying the corners from left to right creates a window selection. (Specifying the corners from right to left creates a crossing selection.) Last. Selects the most recently created visible object.

How do I change the scale of a plot in AutoCAD?

Use a Custom Scale

1. Click Output tab Plot panel Plot. Find.
2. In the Plot dialog box, under Plot Scale, enter a custom scale. The scale requires two values, the number of plotted units (inches or mm) per the number of drawing units. …
3. Click OK to plot the drawing.