Question: How do you draw a rectangle at an angle in Solidworks?

How do you draw a line at an angle in Solidworks?

To create an angular dimension between two lines:

1. In an open sketch, click Smart Dimension (Dimensions/Relations toolbar) or Tools, Dimensions, Smart.
2. Click one line.
3. Click the second line.
4. Move the pointer to show the angular dimension preview.
5. Set the value in the Modify box and click .
6. Click to place the dimension.

How do you curve a rectangle in Solidworks?

In order to round off the corner edges of the rectangle use the Fillet tool also found on the feature tab.

1. Click on the fillet tool.
2. Select the corner edges you want to round off.
3. Define the radius of the fillet (0.25 in)
4. Click the green check mark.

How many types of rectangle are there in Solidworks?

Rectangles

How do you draw a line in SolidWorks?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

How do you draw a vertical line in SolidWorks?

on the Sketch toolbar, or click Tools > Sketch Entities > Line.

…

In the Insert Line PropertyManager under Orientation, select one of the following:

1. As sketched.
2. Horizontal.
3. Vertical.
4. Angle.

How do you draw a rectangle?

Steps

1. Draw a straight, horizontal line using a ruler. …
2. Make a shorter vertical line coming down from one end of the first line. …
3. Draw a horizontal line coming off the bottom end of the vertical line. …
4. Draw a vertical line between the ends of the two horizontal lines. …
5. Color in your rectangle to make it pop.

How do you draw a square in Solidworks?

Sketch a square, extrude it using Boss Extrude

1. Select a plane or planar face and begin a sketch.
2. Select the rectangle tool. …
3. Make your first click on the red origin icon. …
4. Add a dimension to one of the lines on the square’s perimeter. …
5. Extrude the square using Boss Extrude.

How do I make a solid shape solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do you draw a curve in Solidworks?

on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. , select the curve in the graphics area or from the flyout FeatureManager design tree. , select the cylindrical face on the model where you want to project the sketch.

How many options do you have when you select the rectangle sketch tool?

You can draw rectangle by selecting the tool from The Sketch toolbar or from menubar. The rectangle tool contains 4 rectangle drawing methods and one parallelogram option.

How do I change the size of a rectangle in SolidWorks?

To change the size or shape of a rectangle: In an open sketch, drag a side or vertex.

…

Access the rectangle tools by:

1. Sketch tab. Clicking the Rectangle Command Manager , to select rectangle tools from the Rectangle flyout tool .
2. Menu. …
3. Rectangle PropertyManager.

How do you make a trapezium in SolidWorks?

To construct trapezoids:

1. Type Trapezoid at the command prompt.
2. In the graphics area, specify the midpoint of the first side.
3. Specifiy the insertion angle of the trapezoid (the angle of the axis).
4. Specify the length of the axis.
5. Specify the height of the first base of the trapezid.
6. Specify the height of the second base.