How do you make part independent in SolidWorks?

How do you make a part not fixed in Solidworks?

You cannot fix or float an instance in a component pattern. To fix or float an assembly component: Right-click the component in the graphics area or the component’s name in the FeatureManager design tree. Select Fix or Float.

How do you make a mirror component independent in Solidworks?

Optionally, if you want to independently edit the features of the mirrored part without affecting the original part, under Link, click Break link to original part. You can also break the link to the original part later by listing the mirrored part’s external references and selecting Break All.

How do you make a part based on another part in Solidworks?

To insert a part:

1. With a part document open, click Insert Part (Features toolbar) or Insert > Part.
2. Browse to a part document and click Open. …
3. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do I create a virtual part in Solidworks?

To make externally saved components virtual while inserting them into an assembly:

1. Do one of the following: …
2. In the PropertyManager, under Options, select Make Virtual.
3. Under Part/Assembly to Insert, select or browse to a component and click to place it in the graphics area. …
4. Click OK.

How do you make a subassembly flexible in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How can you create relationships between parts within an assembly?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

How do you un fix something in Solidworks?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement.

What are breadcrumbs in Solidworks?

Selection breadcrumbs are a context-based view of the current selection. They show related elements in the hierarchical tree for parts and assemblies. You can select an item in the graphics area and refine that selection through the context-based representation of the item by using breadcrumbs.

How do I mirror a part in Solidworks assembly?

In a part, select a face or plane to mirror about, and then click Insert > Mirror Part. See Creating Opposite-Hand Versions of Parts. Mirror an assembly feature. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror.

Can you invert a part in Solidworks?

When you select items (usually a small number) and invert the selection, all other similar items in the document are selected and the original selections are canceled. To invert selection: Select items to be excluded. (Selection filter toolbar) or Tools > Invert Selection.

Where is mirror in Solidworks?

The mirror entities feature can be found under the ‘sketch’ tab in the command manager or in tools > sketch tools > mirror.

How do I create a part within an assembly in SolidWorks?

Creating a Part in an Assembly

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ). …
4. Construct the part features, using the same techniques you use to build a part on its own.

How do I add assembly to part in SolidWorks?

To insert a new subassembly: Do one of the following: In the FeatureManager design tree, right-click either the top-level assembly icon or the icon for an existing subassembly, and select Insert New Subassembly. Click New Assembly (Assembly toolbar) or Insert > Component > New Assembly.