How do you zoom in on Catia V5?

How do I move the camera in Catia?

Select the Position tab.

1. Click the Update camera from view radio button and click the OK button in the Properties dialog box to confirm.
2. Pan, rotate and zoom in the main window to define the view that the camera will represent. The camera is automatically updated from the view.

How do you zoom in on tree in Catia?

Select General > Display. Go to the Tree Manipulation tab. Under Zoom on Tree, clear this check box. If you should have the need to resize your tree afterwards, hold down the key while scrolling the mouse wheel as an alternative.

How do you zoom in on Creo?

You can zoom in the selected area of a graphics window using the one of the following options:

1. Press CTRL and middle-click. The pointer changes to . …
2. Drag the mouse diagonally over the target geometry and center the geometry in the zoom box. As you drag, the zoom box is created.
3. Middle-click to define the zoom box.

How do I rotate axis in Catia V5?

Rotating Geometry

1. Click Rotate . The Rotate Definition dialog box appears as well as the Tools Palette. …
2. Define the rotation type: …
3. Select the Element to be rotated.
4. Select the inputs depending on the chosen rotation type.
5. Click OK to create the rotated element.

How do I rotate in Catia Drafting?

1- Open CATIA 2- Open new drawing 3- Create a circle ,Create center line for the circle 4- Click Rotate icon 5- Select the center line and then its center point 6- Input the angle value 45 deg 7- Check off Duplicate mode 8- Click OK .

Where are the parts of the Catia tree?

Open the document Search1. CATProduct. Run the Search command by pressing Ctrl+F or by selecting Edit > Search . The Search dialog box appears.

…

Click the Search button:

1. Now activate “Sketch. 1” in the specification tree.
2. Keep the same scope and name options.
3. Click the Search button:

How do I turn on tree in Catia?

When a white branch of the specification tree or the global axis (lower right hand corner) is selected it activates the spec tree and deactivates the model. Activating the spec tree allows the user to pan and zoom the tree vs the model. Select a white spec tree branch again or the global axis to re-activate the model.

How do I find a missing Catia tree?

RE: tree disappeared



You will have the XYZ axis at the right bottom corner of the display area. You can do a mouse click on it so that the geometry grays out. Now you can scroll back the tree using the mouse. Click the same axis after the tree is visible to get back the grayed out geometry.