How do you lock a part in Solidworks assembly?

How do you constrain parts in SolidWorks assembly?

To define assembly constraints:

1. Under Tolerance Assembly, select a part to constrain in the simplified assembly. …
2. Set the primary constraint by clicking 1 in the callout constraint of plane P6. …
3. Set another constraint. …
4. Set a tertiary constraint. …
5. Click .

How do you stop collision in SolidWorks assembly?

Select Stop at collision to stop the motion of the component when it touches any other entity. The faces that touch the component you are moving are highlighted.

How do you constrain motion in Solidworks?

In the PropertyManager, under Advanced Mates:

1. Click Distance or Angle .
2. Set Distance or Angle to define the starting distance or angle.
3. Select Flip Dimension to move the entities to opposite sides of the dimension.
4. Set Maximum Value. and Minimum Value. to define the maximum and minimum extents of the limit mate.

How do I change the position of an assembly in Solidworks?

To edit a position:

1. In the FeatureManager design tree, select Mate Controller and click Edit Feature .
2. In the PropertyManager, under Mates Positions, select Position 2 from the list. The components move to Position 2.
3. Change the value of Distance1 from 30 to 60 . …
4. Click Update Position . …
5. Click .

How do I allow a part to move in an assembly in SolidWorks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you keep Collision Detection on in SolidWorks?

Click Move Component or Rotate Component (Assembly toolbar). In the PropertyManager, under Options, select Collision Detection. If the component you are moving touches any other component in the assembly, the collision is detected.

How do you stack parts in SolidWorks?

Right-click Smart Fastener in the FeatureManager design tree and select Edit Smart Fastener. In the PropertyManager, under Results, select the Group to which you want to add a washer. Under Series Components, select a washer in Add to Top Stack. The washer is added to Top Stack .

How do I repair components in SolidWorks?

Temporarily Fixing or Grouping Components

1. Click Temporary Fix/Group (Assembly toolbar) or Tools > Component > Temporary Fix/Group.
2. In the dialog box, set the following options: Option. …
3. Click Fix/Group. The selected components are fixed or grouped. …
4. Drag to move or rotate components.
5. (Optional.) …
6. Click Exit.

How do you lock an angle in Solidworks?

Locking Dimensions

1. In an open sketch, click Smart Dimension. …
2. Click the items to dimension.
3. Move the pointer. …
4. Right-click to lock. …
5. Move the pointer around until the dimension is correctly located.
6. Click to place the dimension.
7. Set the value in the Modify box and click .

How do I turn on the freeze bar in Solidworks?

To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar.