How do you extrude two directions in Solidworks?

How do you extrude the opposite direction in SolidWorks?

Select a face or plane in the graphics area for Face/Plane , and enter the Offset Distance . Select Translate surface to make the end of the extrusion a translation of the reference surface, rather than a true offset. If necessary, select Reverse offset to offset in the opposite direction. Up To Body.

How do I change the direction of my extrude in SolidWorks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

How do you change direction of Extrude?

You can control the direction of extrusion by clicking in the Edit Extrusion dialog box. The arrow in the viewport changes direction to show the new extrusion direction.

How can you Extrude a sketch equally in both directions from the sketch?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you extrude a 2D drawing in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

How do I merge two surfaces in Solidworks?

In the PropertyManager, under Selections:

1. Select faces and surfaces for Surfaces and Faces to Knit .
2. Select Try to form solid to create a solid model from enclosed surfaces.
3. Select Merge entities to merge faces with the same underlying geometry.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

Can you extrude a surface in Solidworks?

You can select either a surface or the face of a solid body. You can also preselect the 3D faces to extrude before clicking Insert > Surface > Extrude. Select other faces to define the extrude as required.

How do you extrude a curved surface in Solidworks?

To extrude a surface:

1. Sketch the profile of the surface.
2. Click Extruded Surface (Surfaces toolbar) or Insert > Surface > Extrude.
3. Set the PropertyManager options. Extruded surface using Mid Plane from sketched spline.
4. Click OK . Resulting extruded surface.

How do you select two planes in SolidWorks?

Creating Planes

1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
2. In the PropertyManager, select an entity for First Reference . …
3. Select a Second Reference and Third Reference as necessary to define the plane. …
4. Click .

What is direction of extrusion?

Orientation of the polymer in the direction of the extrusion increases the tensile strength of the insulation or tubing in the extrusion direction above the strength in the transverse direction, as shown in the Figure 16.9(A).

How do you specify direction of extrusion in 3D sketch?

You can specify extrude direction with 2D and with 3D sketches by specifying a direction vector as the Direction of Extrusion.

…

Example: Specifying the Direction of Extrusion.