How do I use trim entities in Solidworks?

What is the use of trim entities?

Extends or trims two sketch entities until they intersect at a virtual corner. Trims open sketch entities that lie inside two bounding entities. Trims open sketch entities outside of two bounding entities. You can use the Trim PropertyManager to select a trim type and control other trimming options.

How do you trim an object in Solidworks?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

What does the trim tool do in Solidworks?

The power trim tool is a favorite among SOLIDWORKS users. It’s a handy tool to cut away, trim or sketch geometry quickly.

How many types of trim are in Solidworks?

You can use any of the following trim options: Power trim. Corner. Trim away inside.

How do you split a sketch in Solidworks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

How do I trim a solid part in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do I trim in Solidworks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you trim an intersecting body in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you cut a 2D shape in Solidworks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.