Frequent question: What is revolved surface in SolidWorks?

What is revolved surface?

A surface of revolution is a surface in Euclidean space created by rotating a curve (the generatrix) around an axis of rotation. Examples of surfaces of revolution generated by a straight line are cylindrical and conical surfaces depending on whether or not the line is parallel to the axis.

How do you use revolve surface in SolidWorks?

To create a revolved surface:

1. Sketch a profile and a centerline around which to revolve the profile.
2. Click Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
3. Set the PropertyManager options.
4. Click OK .

What is a revolve in SolidWorks?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

What is revolved boss in SolidWorks?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.

How do you rotate a shape in Solidworks?

Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

How do you do a surface sweep in Solidworks?

Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep. Set the PropertyManager options. Click OK .

What is revolved cut?

“ – The revolved cut feature allows us to take a basic shape and revolve it around a center line to create a cut into parts or multiple parts.

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What does thin feature do in Solidworks?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.

What is lofted boss base in Solidworks?

A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points. All sketch entities, including guide curves and profiles, can be contained in a single 3D sketch.

How do I convert entities in Solidworks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .