Your question: How do I create a parting surface in Solidworks?

What is parting surface in Solidworks?

Parting surfaces are used to separate the mold cavity from the core. Contents. Creating a Parting Surface. You can create a parting surface, which is extruded from parting lines, to separate the mold cavity from the core. You must create a parting surface to create a tooling split.

How do I use the parting surface in Solidworks?

Right-click a vertex at the edge of the part and select Start fill surface region.

…

Manual Mode for Parting Surfaces

1. Click Parting Surfaces (Mold Tools toolbar).
2. Click Insert > Molds > Parting Surface.
3. Select a Parting Surface feature in the FeatureManager design tree and click Edit Feature .

What is flat parting surface?

Parting surface having only one plane is termed as Flat parting surface. The position of the parting surface will therefore be at the top of the moulding. Non-flat parting surface. Parting line which lies on a non-planar or curved surface termed as non-flat parting surface.

How do you do a parting line draft in Solidworks?

Parting Line Draft

1. Sketch the part to be drafted.
2. Insert a split line curve, if desired.
3. Click Draft on the Features toolbar or click Insert > Features > Draft.
4. Under Type of Draft, select Parting Line. …
5. Under Draft Angle, enter the Draft angle .

How do you find the parting line in Solidworks?

To make parting line features visible even when they are not selected, click View Parting Lines (View toolbar) or View > Hide/Show > Parting Lines.

What is the difference between parting line and parting surface?

Parting Line and Parting Surface



It is a line that splits the mold into two parts – the core and the cavity. The concept of a parting surface is similar. A parting surface is a surface that separates the mold block into two parts – the core and the cavity.

What are parting surfaces?

A parting surface is a surface in the model that you designate to split a workpiece, die block, or another volume. A parting surface is made up of a set of features, with the first feature called the base quilt. Any additional features that you create using operations such as trim, merge, and extend are called patches.

What is a stepped parting line?

Stepped Parting Line



For this type of parting line, there’s usually a large force on one side of the cavity. This causes a relative possibility of sliding between the fixed and moving halves of the mold. This force can then be canceled out by generating an injection force on both sides of the cavity.

What is parting line draft?

You can draft surfaces around a parting line. The parting line can be non-planar. In a draft using a parting line, you can also include a Step draft. To draft on a parting line, you can first divide the faces to be drafted by inserting a split line, or you can use an existing model edge.

How do you insert a line break in Solidworks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).