Question: How do you create a cut plane in Revit?

Where is the cut plane in Revit?

The cut plane is located between the top and bottom planes, and it is the dividing line that determines how elements are displayed in the view. The additional plane beyond the primary range is the View Depth.

How do you cut a reference plane in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the beam to be cut. Select the reference plane. If you move the wall or the beam, the cut will persist at the wall unless the beam is no longer joined with the wall.

What height does Revit set the cut plane?

The Cut Plane is an offset height which the view starts from above the host level. For example, if the Cut Plane is set to 1500mm above the finish floor level, and the Bottom is set to 100mm below the Finish floor level, your view will show all items within the 1600mm total View Range Depth.

How do you change a cut plane?

Answer

1. Open a plan view.
2. In the Create panel on the View ribbon, expand the Plan Views split button and click Plan Region.
3. Sketch a closed loop using lines, rectangles, or polygons.
4. In the Properties palette, click Edit.
5. In the View Range dialog box, specify the primary range and view depth for the plan region.

How do you cut a view in Revit?

Create a Section View

1. Open a plan, section, elevation, or detail view.
2. Click View tab Create panel (Section).
3. (Optional) In the Type Selector, select a view type from the list, or click Edit Type to modify an existing view type or create a new view type.

How do I create a region plan in Revit?

Create a Plan Region

1. Open a plan view.
2. Click View tab Create panel Plan Views drop-down (Plan Region).
3. Sketch a closed loop using lines, rectangles, or polygons.
4. On the Properties palette, for View Range, click Edit.
5. In the View Range dialog, specify the primary range and view depth.

How do I change the view range plane in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

What is workset in Revit?

A workset is a collection of elements in a workshared project. You can create worksets based on functional areas, such as the following: For architecture and structural engineering: interior, exterior, and site. For systems: HVAC, electrical, or plumbing.