Best answer: How do you add a boss Extrude in Solidworks?

How do you add an extrusion in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

What is required to create a solid using extrude boss?

Oftentimes when creating solid models, we need an extrusion to go a certain distance in one direction and a different distance in the other direction. In this case, we chose to go 20mm in Direction 1, which is up, and 7.5mm in Direction 2, which is down.

What is extruded boss base?

Oysu. Chapter 3 Extruded Boss and Cut. Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part.

What is solidworks extrude boss base means?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you edit a extrude boss in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you sketch on boss extrude?

To start a sketch with an Extruded or Revolved Boss/Base:

1. Click Extruded Boss/Base or Revolved Boss/Base. …
2. Select one of the three planes (Front Plane, Top Plane, and Right Plane) displayed. …
3. Create a sketch with the sketch entity tool, or select a tool on the Sketch toolbar and create a sketch.

How do you extrude the boss base in assembly in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

What does extruded cut do in SolidWorks?

The Cut-Extrude feature will then preview the shape of cut based on the selected sketch. The Cut-Extrude feature button will prompt you to set parameters in the menu shown in Figure 6.

What does boss base mean?

boss/base A base is the first solid feature of a part, created by a boss. A boss is a feature that creates the base of a part, or adds material to a part, by extruding, revolving, sweeping, or lofting a sketch, or by thickening a surface.

How do you extend extrude in SolidWorks?

Extend Surface

1. Click Extended Surface (Surfaces toolbar) or Insert > Surface > Extend.
2. In the PropertyManager: Under Edges/Faces to Extend, select one or more edges or faces in the graphics area for Selected Face/Edges . For edges, the surface extends along the plane of the edge. …
3. Click .

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is blind in SolidWorks?

Blind: Defines the distance or length extrusion with a numerical value. Through All: Through the entire extent of the geometry. Up to Next: Extends the extrusion through the bounding box of your model.