How do I add dynamic sectioning in Catia?

How do I create sections in Catia?

To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.

How do you update a section view in Catia?

To update the section callout, right-click the section view in 2D, select Synchronize View Definition contextual menu command and then update the current sheet. After this the section callout on the parent view is updated.

How do I cut parts in Catia v5?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do you make stiffener in Catia v5?

This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener. CATPart document. Select the profile to be extruded, that is Sketch.

…

1. Click Stiffener . …
2. Uncheck the Neutral Fiber option. …
3. Check the Neutral Fiber option again. …
4. Enter 12 as the thickness value. …
5. Click OK .

What is master section in Catia?

Master sections are the guides for design requirements which decide the component packaging after technical (Styling, Concept or Class-A) surfaces.

What is an offset section view?

An offset section view is generated by offsetting (bending) the cutting plane to show features that are not in a straight line.

How do I create a detail view in Catia?

Creating a Detail View / Detail View Profile

1. In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar). …
2. Click the callout center. …
3. Drag to select the callout radius and click a point to end the selection. …
4. Click to generate the detail view.

How do I draft in Catia V5?

Tutorial: How to use drafting workbench in Catia V5?

1. Open the model for which drafting is to be performed.
2. Switch to drafting workbench.
3. A new drawing wizard opens up. …
4. Window->tile vertically.
5. You will get a view as shown.
6. Click on front view from the menu.
7. Or get it from. …
8. Click on the face as shown.

How do I cut a view in Catia?

Creating an Offset Section View / Cut

1. In the Drawing window, click Offset Section View in the Views toolbar ( Sections sub-toolbar). If desired, you can also click Offset Section Cut . …
2. Create the first point of the profile. …
3. Choose the constraint. …
4. Double-click to end the cutting profile creation.

What is the difference between split and trim in Catia?

Split versus Trim



The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

How do you split a line in Catia?

CATPart document.

1. Click Split . The Split Definition dialog box appears.
2. Select the element to be split. You should make your selection by clicking on the portion that you want to keep after the split. …
3. Select the cutting element. A preview of the split appears. …
4. Click OK to split the element.

How do you cut materials in Catia?

You can remove material using split and trim command. Split simply cuts the material and trim is the combination of trim and join. If you want to trim, join and give fillet to material, use shape fillet command.

How do you use the stiffener tool in Catia?

If you click the Selection field and select another sketch, CATIA immediately creates the Stiffener. Clicking the icon opens the Sketcher. You can then edit the profile to modify your stiffener. Once you have done your modifications, you just need to quit the Sketcher.

How do you use rib function in Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

How do I use the slot in Catia v5?

The Slot Definition dialog box is displayed. To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction.

…

It is closed.

1. Click to open the Sketcher and edit the profile. …
2. For example, enlarge the profile.
3. Quit the Sketcher when done. …
4. Maintain the Keep angle option.