You asked: How do you swept a boss in Solidworks?

How do you use the swept tool in Solidworks?

Select a sketch in the graphics area for Profile . Select a sketch in the graphics area for Path .

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

What is swept boss base in Solidworks?

What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.

What is swept in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

How do you sweep in Assembly in Solidworks?

Click Assembly Features (Assembly tab on the CommandManager) and click Swept Cut , or click Insert > Assembly Feature > Cut > Sweep . Set options as needed in the Swept Cut PropertyManager. Under Feature Scope, specify which components you want the feature to affect.

How do you use a swept boss?

How to use Swept Boss/Base Feature – SolidWorks Tutorial

1. Click New. …
2. Click Top Plane and click on Sketch.
3. Click Circle and sketch a circle origin as it center. …
4. Exit Sketch.
5. Take a plane normal to spline end (or Click on Front Plane and click Sketch.)
6. Click on View Orientation-Normal To.

How do you use the lofted boss base in SolidWorks?

How to create a Lofted Boss/Base in SolidWorks:

1. Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. …
2. Select the Loft Feature, then choose the profiles in order. …
3. Adjust the Constraints and options as required.

How do you do a sweep cut?

Swept Cut PropertyManager

1. Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. For a solid profile, open a part that has a tool body as the profile and a sketch path to follow.
2. Click Swept Cut (Features toolbar).

How do you cut in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

Can you sweep a body in SolidWorks?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.

…

Sweeps.

How do you sweep a tube in SOLIDWORKS?

To create a circular profile sweep:

1. In a part, click Insert > Cut > Sweep to cut a tube into the part.
2. In the PropertyManager, under Profile and Path, click Circular Profile.
3. In the graphics area, select a curved edge for Path. …
4. Click . …
5. Click Insert > Boss/Base > Sweep to add the solid rod.