How do I start drawing in SolidWorks?

How do I get engineering drawings in Solidworks?

To generate drawings from part and assembly documents:

1. In a part or assembly document, click Make Drawing from Part/Assembly on the Standard toolbar and select a template in the Sheet Format/Size dialog box. …
2. Click to pin the View Palette.
3. Drag a view from the View Palette onto the drawing sheet.

How do you make a 2D drawing in Solidworks?

How to make a 2D drawing in SOLIDWORKS

1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu. …
2. Select Drawing to use a default template.
3. Click OK.
4. Select a sheet size and format.
5. Select a standard view orientation.
6. Begin a SOLIDWORKS 2D drawing.

How do you Sketch a part in Solidworks?

Sketching on the Face of a Part

1. Select the planar model face on which you want to sketch.
2. Click a sketch tool on the Sketch toolbar, click Sketch. , or click Insert > Sketch . …
3. To sketch on a different face, exit the current sketch, select the new face, and open a new sketch.

How do I add a drawing template in Solidworks?

To create a template:

1. Click New (Standard toolbar) or File > New.
2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
3. Click Options (Standard toolbar) or Tools > Options.
4. On the Document Properties tab, select options to customize your new document template, then click OK.

How do I draw a line in Solidworks?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

How do you draw an object in Solidworks?

Beginning a 3D Sketch

1. Click 3D Sketch (Sketch toolbar) or Insert > 3D Sketch to open a 3D sketch on the Front plane in Isometric view.
2. Select a plane and then click 3D Sketch on Plane (Sketch toolbar) or Insert > 3D Sketch on Plane to add a 3D sketch in Normal to view.

How do I convert drawings to sketch in Solidworks?

You can convert a drawing view to sketch entities or a block of sketch entities using the Convert View to Sketch PropertyManager. To open this PropertyManager: In a drawing view, right-click and click Convert View to Sketch.

What is the first step to starting a sketch?

What Is It?

1. Get a set of references of a single subject.
2. Analyze them to see common lines.
3. Use these lines to sketch a simple representation of the body (imaginative tracing).
4. Use the gesture sketch as a suggestion to draw the structure over it.
5. Use the previous sketches as guidelines for the final lines.

What is sketch SOLIDWORKS?

The sketch is the basis for a 3D model. You can create a sketch on any of the default planes (Front Plane, Top Plane, and Right Plane), or a created plane. You can start by selecting: Sketch entity tools (line, circle, and so on) Sketch tool.

How do I create a sketch in SOLIDWORKS assembly?

To create a layout:

1. Open a new assembly.
2. In the Begin Assembly PropertyManager, click Create Layout. A 3D sketch opens, and Layout appears in the FeatureManager design tree.
3. Create sketch entities and group related entities into blocks.
4. Close the blocks and the sketch.

How do you write a drawing in Solidworks?

Sketching Text

1. Click a face of a part.
2. Click Text. …
3. In the graphics area, select an edge, curve, sketch, or sketch segment. …
4. In the PropertyManager, under Text, type the text to display. …
5. Set the properties in the Sketch Text PropertyManager as necessary.
6. Click .
7. With the sketch still open, extrude or cut the text.

Where do drawing templates go in Solidworks?

To create a folder to add, click Make New folder in the Select Folder dialog box.

…

Default File Locations.

What is engineering drawing template?

What is a template in engineering? Templates have pre-dimensional holes that are in the right scale, so engineers can accurately draw a specific symbol or sign. Letter templates can be used to draw text (such as digits and letter characters), while others can be used to draw circles and arcs.