Question: How do I create a void in mass Revit?

How do you create a void cut in Revit?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

How do you make a void roof in Revit?

Choose “Void extrusion” to create an In-place family roof. Pick the line on the base of the inside edge of the roof to draw the void in a section view. The “cut geometry” command can be used to select the roof over the void. To execute the cut, click “Finish” after that.

How do you create a massing model in Revit?

Create an In-Place Mass

1. Click Massing & Site tab Conceptual Mass panel (In-Place Mass).
2. Enter a name for the in-place mass family, and click OK. The application window displays the conceptual design environment.
3. Create the desired shapes using the tools on the Draw panel. …
4. When you are finished, click Finish Mass.

Where is create tab in Revit?

The user interface is missing the Create Tab.

…

Solution

1. On the ribbon, click (Model In-Place). Architecture tab Build panel Component drop-down (Model In-Place) …
2. In the Family Category and Parameters dialog, select the family category, and click OK.
3. Enter a name for the in-place element family, and click OK.

How do you cut out a void extrusion in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you cut a void in nested family?

Re: Cut With Voids When Loaded / Nested Families



Use the Generic Face Based. rft to create your void family. Then nest/load it into another family. Place it on a face and it will cut it.

What does cut with voids when loaded mean in Revit?

“Cut with Voids When Loaded: When selected, voids created in the family will cut through solids. The following categories can be cut by voids: ceilings, floors, generic models, roofs, structural columns, structural foundations, structural framing, and walls.”