Question: How do you use revolve Extrude in SolidWorks?

Contents

How do you create a Revolve base in SolidWorks?

Creating Revolve Features

Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

What is revolved cut in SolidWorks?

Revolved Cuts

There are many powerful cutting tools within SolidWorks besides the basic extrude cut tool. The revolved cut tool allows you to cut a profile around an axis creating complex geometry in a single feature. To set up a revolved cut it is very similar to any other feature, you start with a sketch.

How do you extrude in SolidWorks?

Extruding Surfaces from a 2D or 3D Face

Click Insert > Surface > Extrude.
Select a face: …
Select other faces to define the extrude as required. …
Select the end condition.
For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

Where is revolve in SolidWorks?

Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

What is SolidWorks extrude boss base means?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

IT IS INTERESTING: How do I create a collaboration in Revit?

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

How do you use revolve cut?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.

What does zero thickness mean in Solidworks?

Zero-thickness geometry (also known as non-manifold geometry) exists when edges or vertices in a solid model do not properly connect with adjacent geometry. Every edge of a solid body must have exactly two adjacent faces.

What is revolve function?

The Revolve command in AutoCAD 3D is used to create a 3D solid or surface by sweeping the object through its axis at a predefined angle. The paths and objects that can be revolved are: Planar. Non-planar.

What is use of revolve feature?

About the Revolve Feature. Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

How do you use the revolve command in Fusion 360?

Note: When you invoke the Revolve command, and there is only one profile visible in your design, it gets automatically selected.

Design > Solid > Create > Revolve.
Design > Surface > Create > Revolve.
Design > Form > Create > Revolve.

IT IS INTERESTING: How do I delete all components in SketchUp?