How can you correct an over defined sketch?
There are two common ways to fix over defining dimensions.
- Delete the over defining dimension in the graphics area.
- Right-click the over defining dimension in the graphics area and select Properties. …
- When you add a dimension that over defines a sketch, the Make Dimension Driven dialog box appears.
How do you lock a sketch in SOLIDWORKS?
Locking Dimensions
- In an open sketch, click Smart Dimension. …
- Click the items to dimension.
- Move the pointer. …
- Right-click to lock. …
- Move the pointer around until the dimension is correctly located.
- Click to place the dimension.
- Set the value in the Modify box and click .
How do I fix a sketch in origin in SOLIDWORKS?
Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .
How do you fix small gaps in SOLIDWORKS?
1 Answer
- Draw a sketch to encompass the defect.
- Use a split curve to divide the model faces along the sketch from step 1.
- Delete the problem model faces.
- “Close” the open edge of the model. Here I used a 3D sketch with a two point spline. …
- Make use of a tool like Boundary, Loft, or Fill to “rebuild” the missing faces.
How do I fix errors in Solidworks?
To control the rebuild action:
- Click Options (Standard toolbar) or Tools, Options.
- Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.
How do I edit a full defined sketch in Solidworks?
To fully define a sketch:
- Edit a sketch.
- Click Fully Define Sketch. (Dimensions/Relations toolbar) or Tools > Dimensions > Fully Define Sketch.
- Set the options for relations and dimensions in the Fully Define Sketch PropertyManager.
- Click .
Why is my sketch not fully defined?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
How do I get my SOLIDWORKS toolbar back?
To display SOLIDWORKS toolbars:
- Right-click in the window border and select or clear a toolbar name.
- Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
What does the (-) mean in SOLIDWORKS?
ago. Additional comment actions. The (-) means its not fully constrained/defined.
How do you move a sketch in Solidworks?
Moving or Copying Sketch Entities
- Click Move Entities. (Sketch toolbar) or Tools > Sketch Tools > Move.
- Click Copy Entities. (Sketch toolbar) or Tools > Sketch Tools > Copy.
- Right-click to display the Sketch shortcut menu, click Sketch Tools, and click Move Entities or Copy Entities.
How do you Unfix a component in Solidworks?
To fix or float an assembly component:
- Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
- Select Fix or Float.
- In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.
Where are Solidworks tools?
Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
How do you fill gaps in Solidworks?
To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK . Set the PropertyManager options based on the type of filled surface you want to create. This example of an imported surface has a gap along the front face.
What tool can you use to find small gaps in Solidworks?
Repair Sketch Dialog Box
Showing gaps smaller than | The maximum value that determines a gap or overlap error. Larger gap or overlap values are considered intentional. |
---|---|
Refresh | Re-run Repair Sketch. If you have updated the sketch, click Refresh to verify that you have fixed previous errors or to find new errors. |
How do you merge gaps in Solidworks?
Select Gap Control to view the gaps or modify the knitting tolerance.
…
In the PropertyManager, under Selections:
- Select faces and surfaces for Surfaces and Faces to Knit .
- Select Try to form solid to create a solid model from enclosed surfaces.
- Select Merge entities to merge faces with the same underlying geometry.