How do you cut something in Revit?

How do you cut an object in Revit?

When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel Trim drop-down (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend.

How do you cut a void in Revit?

Cutting with voids in families when loaded

1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
3. Load the family into the project and place it.

How do you scale in Revit?

Do one of the following:

1. Select the elements to scale, and click Modify | tab Modify panel (Scale).
2. Click Modify tab Modify panel (Scale), select the elements to scale, and then press Enter .

How do I trim in Revit 2018?

click Modify tab Modify panel (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend. If this element crosses the boundary (or a projection), the part that you click is retained.

How do you cut out a floor in Revit?

Cut an Opening in a Floor, Roof, or Ceiling

1. Click By Face or Vertical. Where is it? Architecture tab Opening panel. Structure tab Opening panel. …
2. If you chose By Face, select a face in the floor, ceiling, or roof. If you chose Vertical, select the entire element. Selected face for opening by face. …
3. Click Finish Opening.

How do you trim an extrusion in Revit?

Choose “Void extrusion” to create an In-place family roof. Pick the line on the base of the inside edge of the roof to draw the void in a section view. The “cut geometry” command can be used to select the roof over the void. To execute the cut, click “Finish” after that.

How do you cut extrudes in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you cut a solid solid in Revit?

Solid forms will only cut the following solids: Form elements.

…

Family instances inside of the massing editor.

1. Create two adjacent solid forms. …
2. Click Modify tab Geometry panel (Cut).
3. Select the solid form to be cut.
4. Select the cutting solid form.