How do you cut a 3D model in Solidworks?

How do you cut out a shape in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you cut an entity in SolidWorks?

To trim with the Power trim option:

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities. …
3. In the PropertyManager, under Options, select Power trim .
4. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

How do you trim extruded objects in SolidWorks?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.

How do you use surface trim?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

How do I cut part of a Solidworks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude cut a 3D sketch in SolidWorks?

You can create extruded surfaces from models that include 2D or 3D faces and knit the extruded surfaces to surrounding features. Click Insert > Surface > Extrude. Select a face: To extrude from a 3D face, select a 3D face.

How do you cut a 2D shape in SolidWorks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

What is revolved cut in SolidWorks?

Revolved Cuts



There are many powerful cutting tools within SolidWorks besides the basic extrude cut tool. The revolved cut tool allows you to cut a profile around an axis creating complex geometry in a single feature. To set up a revolved cut it is very similar to any other feature, you start with a sketch.

How do I trim in Solidworks 2017?

Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim. In the PropertyManager, under Trim Type, select a type: Standard. Trims surfaces using surfaces, sketch entities, curves, planes, and so on.

What is the use of trim entities?

Extends or trims two sketch entities until they intersect at a virtual corner. Trims open sketch entities that lie inside two bounding entities. Trims open sketch entities outside of two bounding entities. You can use the Trim PropertyManager to select a trim type and control other trimming options.

How do you trim a surface in Civil 3D?

Trim a Surface



Select the surface and press Enter. Select the cutting curves and press Enter. Select the surface areas to remove and press Enter. The selected areas are remove d.

How do you cut edges in Solidworks?

To create a corner-trim:

1. Create a sheet metal part.
2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
4. Click .

How do you trim tubes in Solidworks?

To cut pipes or tubes that penetrate each other:

1. In the FeatureManager design tree, expand the route assembly .
2. Right-click Route. …
3. Right-click the point where the straight run and the branch intersect (the intersection of the 3D sketch segments), and select Penetrate.