How do you create a vertical relationship in SolidWorks?

How do you add a perpendicular relationship in Solidworks?

(Dimensions/Relations toolbar) or Tools > Relations > Add to create geometric relations (such as tangent or perpendicular) between sketch entities, or between sketch entities and planes, axes, edges, or vertices. You can choose whether geometric relations are automatically created as you create sketch entities.

How do you draw a vertical line in Solidworks?

on the Sketch toolbar, or click Tools > Sketch Entities > Line.

…

In the Insert Line PropertyManager under Orientation, select one of the following:

1. As sketched.
2. Horizontal.
3. Vertical.
4. Angle.

How do you create a parallel relation in Solidworks?

To add parallel dimensions to a drawing:

1. Click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click the geometry to dimension.
3. Use rapid dimensioning to place evenly spaced dimensions. Alternatively, move the pointer outside of the rapid dimension selector to place the dimension.

How do you make two points vertical in SolidWorks?

You can create a vertical dimension between two points. The vertical direction is defined by the orientation of the current sketch. (Dimensions/Relations toolbar) or Tools > Dimensions > Vertical. Click the two points to dimension.

How do I add a coincident relationship in SolidWorks?

How to Add a Coincident in SolidWorks

1. Select a line, point, center line or temporary axis with the left mouse button. …
2. Hold the “Control” key and select the second line, point or temporary axis by left-clicking it. …
3. Click the “Coincident” button in the Add Relations section of the properties box.

How do you join two points in Solidworks?

To add a connection point:

1. Create a sketch point to use for locating the connection point. The location of the connection point defines the end of the adjoining routing segment; that is, the point where the pipe, tube or wiring begins or ends.
2. Click Create Connection Point. …
3. Edit properties in the PropertyManager.
4. Click .

How do you create a reference Line in Solidworks?

1) Command manager: Feature > select reference geometry > Plane. 2) OR Menu: Insert > Reference Geometry > Plane. Plane at offset Distance: If we want to draw a new sketch at some distance of part it needs new plane.

How do you crop a view in Solidworks?

To crop a view:

1. In a drawing view, sketch a closed profile such as a circle.
2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

How do you break out a section in Solidworks?

To create a broken-out section:

1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
2. Sketch a profile.
3. Set options in the Section View dialog box. …
4. Set options in the Broken-out Section PropertyManager. …
5. Click .

What does collinear mean in Solidworks?

Collinear. Two or more lines. The items lie on the same infinite line. Coradial. Two or more arcs.