How do you anchor a part in Solidworks?

How do you lock a part in Solidworks assembly?

Locking and Breaking External References

1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
2. Click External References. …
3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
4. Click OK.

How do you join a piece in Solidworks?

Combining Bodies – Add

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Add.
3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. …
4. Click Show Preview to preview the feature.
5. Click .

How do I change the anchor point in Solidworks?

8. How to set or change the position of table anchors

1. Right-click a table anchor in the tree.
2. Select Set Anchor. …
3. Click to define the new position of the anchor.
4. Once you click, SOLIDWORKS stores the new position and you exit Edit Sheet Format mode.
5. Save your change via File > Save Sheet Format.

Why is my part fixed in Solidworks?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

How do I lock a model in Solidworks?

Open the System Options, and on the General page check Enable Freeze bar. This adds the Freeze bar to the design tree in the Feature Manager. Drag the bar below the features you want to lock. Release your left mouse button, and the features are locked.

What is a Solidworks part?

part. A single 3D object made up of features. A part can become a component in an assembly, and it can be represented in 2D in a drawing. Examples of parts are bolt, pin, plate, and so on. The extension for a SOLIDWORKS part file name is .

How do I make multiple parts from a single part in Solidworks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options. …
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save. …
5. Click .

How do you anchor a table in Solidworks?

To set a table anchor point:

1. In the FeatureManager design tree, expand Sheet Format. for the active drawing sheet.
2. Right-click the anchor you want to set and select Set Anchor. Choose from: General Table Anchor. Revision Table Anchor. Bill of Materials Anchor. …
3. Click in the graphics area to specify the anchor point.

How do I edit a table in Solidworks?

Editing a Design Table

1. In the ConfigurationManager, right-click Design Table and click Edit Table or Edit Table in New Window. The worksheet appears in the window. …
2. Edit the table. …
3. Click outside of the table to close it. …
4. If you receive a confirmation message that the design table generated new configurations, click OK.

How do I add a point to a drawing in Solidworks?

To create sketch points: Click Point (Sketch toolbar) or Tools > Sketch Entities > Point. Click in the graphics area to place the point. The Point tool remains active so you can continue to insert points.

How do I change the position of a part in Solidworks assembly?

To edit a position:

1. In the FeatureManager design tree, select Mate Controller and click Edit Feature .
2. In the PropertyManager, under Mates Positions, select Position 2 from the list. The components move to Position 2.
3. Change the value of Distance1 from 30 to 60 . …
4. Click Update Position . …
5. Click .

How do I replace a part in a Solidworks assembly?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

How do you explode an assembly in Solidworks?

To create an exploded view:

1. Do one of the following options: Click Exploded View . …
2. Select one or more components to include in the first explode step. …
3. Drag a translation or rotation handle to move selected components.
4. Modify explode options: …
5. Click Done. …
6. Create more explode steps as required, and click .