How do I create a custom wall sweep in Revit?

Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep). On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties. In the Type Properties dialog, for Profile, select the desired profile type. Click OK.

How do you create a wall sweep in Revit?

Click Architecture tab Build panel Wall drop-down (Wall: Sweep). In the Type Selector, select the desired type of wall sweep. Click Modify | Place Wall Sweep Placement panel, and select the orientation of the wall sweep: Horizontal or Vertical. Place the cursor over the wall to highlight the wall sweep location.

How do I create a sweep profile in Revit?

On the Mode panel, click (Finish Edit Mode). Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.

What is a sweep in a foundation wall?

Foundation walls and piers in small residential buildings are usually made of masonry. … Horizontal bulging in the masonry is known as sweeping.

What is a wall sweep?

Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall. You can add a wall sweep to a wall from a 3D or elevation view. To add a sweep for all walls of a type, modify the wall structure in the wall’s type properties.

What are the two necessary elements to create a sweep?

Two elements are required to create a sweep surface: Trajectory—Curve or curves that guide the sweep. Cross-sectional sweep profile—Curve or curves that sweep along the trajectory. ◦ One or two trajectories can be used.

How do I edit a sweep profile in Revit?

Help

1. On the Modify | Sweep tab Sweep panel, click (Select Profile).
2. On the Sweep panel, use the tools that display to select a new sweep profile or change the sweep profile location.
3. To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

What is sweep in Revit?

Jul 22 2021In-product view. Create a sweep form from a line and a 2D profile sketched perpendicular to the line. The line in the sweep defines the path along which the 2D profile is swept to create the 3D form. The profile consists of linework drawn perpendicular to the line or series of lines that define the path.

How do you do a sweep?

Create a Sweep

1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
2. Specify the sweep path: …
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile. …
5. On the Properties palette, specify the sweep properties. …
6. On the Mode panel, click (Finish Edit Mode).

How do you create a profile in Revit?

Create a Profile Family

1. Click File tab New Family.
2. In the New Family – Select Template File dialog, select a profile template, and click Open. …
3. If necessary, sketch reference planes for constraining the lines in the profile.
4. Click Create tab Detail panel (Line), and sketch the profile loop.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.