You asked: How do I add a section view in Catia?

How do I create a section cut in Catia?

Creating 3D Section Cuts

  1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane. …
  2. In the Definition tab, click Volume Cut to obtain a section cut:

How do I create a section view?

To create a section view manually:

  1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
  2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
  3. Sketch a section line. …
  4. Click to place the view.

How do I create an aligned section view in Catia v5?

In the Drawing window, click Aligned Section Cut in the Views toolbar ( Sections sub-toolbar). If desired, you can also click Aligned Section View . Define a profile, by creating one or several lines by creating a point first and then further creating the complete profile. Create the first point of the profile.

How do I cut a view in Catia?

Creating an Offset Section View / Cut

  1. In the Drawing window, click Offset Section View in the Views toolbar ( Sections sub-toolbar). If desired, you can also click Offset Section Cut . …
  2. Create the first point of the profile. …
  3. Choose the constraint. …
  4. Double-click to end the cutting profile creation.
IT IS INTERESTING:  Question: Is Autodesk SketchBook Pro free?

How do you draw an offset section view?

An offset section view is generated by offsetting (bending) the cutting plane to show features that are not in a straight line.

  1. Click Layout tab Create View panel Section drop-down Offset . …
  2. Click the view you want to use as the parent view. …
  3. Click in the drawing area to indicate the start point of the section line.

What is removed section?

A section removed from its normal projected position in the standard arrangement of views is called a “removed” section. Such sections are labeled SECTION A-A, SECTION B-B, etc., corresponding to the letter designation at the ends of the cutting plane line.

How are section lines shown?

Rule 1: A section lined area is always completely bounded by a visible outline. Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown.

How do you use section lines?

Section Lines: Used to indicate where the cutting plane cuts the material. Section lines are thin and the symbols (type of lines) are chosen according to the material of the object. Section lines are generally drawn at a 45° angle. Your browser might not support the ability to play mp3 files from within a webpage.

How do I align parts in Catia?

Aligning Objects

  1. Double-click the item (e.g., a tool) that you want to align. …
  2. On the Layout Tools toolbar, click the black arrow on Align Side. …
  3. Select the icon for the type of alignment you want to perform: …
  4. Define the plane to use as a reference for alignment.
IT IS INTERESTING:  What are different types of arrays in autocad?

What is a sectional view?

A sectional view represents the part of an object remaining after a portion is assumed to have been cut and removed. The exposed cut surface is then indicated by section lines. Hidden features behind the cutting plane are omitted, unless required for dimensioning or for definition of the part.

What is revolved section?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

How do I get the space analysis toolbar in Catia?

Procedure:

  1. Go to Tools -> Customize,
  2. Select the Tool-bars tab.
  3. Select New..,
  4. select Assembly Design workbench (left window),
  5. and select Space Analysis (right window).

How do you break out a section in Solidworks?

To create a broken-out section:

  1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
  2. Sketch a profile.
  3. Set options in the Section View dialog box. …
  4. Set options in the Broken-out Section PropertyManager. …
  5. Click .
Special Project