How do I create a custom table in SolidWorks?

How do I create a custom revision table in Solidworks?

Click on the annotation tab on the toolbar located near the top of the screen. Once on that tab, select the drop-down menu for the table’s command and there will be a Bill of Materials option. The Revision table command is also located here.

Where are solidworks table templates stored?

Standard templates for Bend Tables, Bills of Materials, Hole Tables, Punch Tables, Revision Tables, Weldment Cut Lists, Weld Tables, and Title Block Tables are available in solidworkslang. You can specify a different folder, and you can save and use custom templates.

How do I edit a table in Solidworks?

Editing a Design Table

1. In the ConfigurationManager, right-click Design Table and click Edit Table or Edit Table in New Window. The worksheet appears in the window. …
2. Edit the table. …
3. Click outside of the table to close it. …
4. If you receive a confirmation message that the design table generated new configurations, click OK.

How do I add a revision table to a worksheet in Solidworks?

To insert a revision table:

1. Click Revision Table on the Table toolbar, or click Insert, Tables, Revision Table.
2. Set the properties in the Revision Table PropertyManager , then click OK . You can insert text in empty cells by double-clicking the cells and typing text.

How do I create a template in Solidworks?

To create a template:

1. Click New (Standard toolbar) or File > New.
2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
3. Click Options. …
4. On the Document Properties tab, select options to customize your new document template, then click OK. …
5. Click File > Save As.

How do you create a drawing templates and sheet formats in Solidworks?

SOLIDWORKS Drawing Templates

1. File > Open and change your file type option to Template. …
2. Change the drawing sheet size if necessary.
3. Change the sheet format to the desired sheet format file.
4. Change any options needed within the Document Properties.

How do I create a template in Solidworks 2019?

To create a template:

1. Click New (Standard toolbar) or File > New.
2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
3. Click Options (Standard toolbar) or Tools > Options.
4. On the Document Properties tab, select options to customize your new document template, then click OK. …
5. Optional.

How do I install a template in Solidworks 2020?

In the SOLIDWORKS software, click Options or Tools > Options. On the System Options tab, select File Locations. In Show folders for, select Document Templates. Click Add, browse to the folder you created in step 1, and click Select Folder.

How do I format a table in Solidworks?

When you use design tables in the SOLIDWORKS software, it is important to format the tables properly.

1. In the ConfigurationManager, right-click Design Table and select Edit Table or Edit Table in New Window. …
2. Edit the table as needed. …
3. Click outside of the table to close it.

How do I move a design table in Solidworks?

Inserting Design Tables into Drawings

1. In a drawing of the part or assembly, select a drawing view.
2. Click Insert > Tables > Design Table. The design table appears, and you can drag it into place on the sheet.

How do I edit a table template in Solidworks?

To customize a table template:

1. Open a model that contains the characteristics needed for the template: Components. …
2. Insert a table. In the table PropertyManager, specify one of the standard templates shipped with the SOLIDWORKS software; for example: …
3. Edit the table as described below, then save the table as a template.

How do I create a Bill of Materials in Solidworks?

To insert a Bill of Materials into a drawing:

1. Click Bill of Materials (Table toolbar), or Insert > Tables > Bill of Materials.
2. Select a drawing view to specify the model.
3. Set the properties in the Bill of Materials PropertyManager, then click OK .

How do you add material to a Bill of Materials?

Applies to Excel-based Bills of Materials. You can add more information such as Material, Vendor_Number, Cost, and so on to the open part or subassembly document by clicking File > Properties and selecting the Custom tab or the Configurations specific tab.