How can you go back and correct a sketching mistake you made when creating a part using Onshape?

How do you fix a sketch on Onshape?

Currently, we have two circles on our sketch plane. If you click the center you can freely move the circle around. If you click the center of the circle and then click the Fix tool on the sketch toolbar, the Fix icon is affixed to the circle, and you can no longer move the circle.

How do you fix a over defined sketch in Solidworks?

To manually repair over defined sketches:

1. In the PropertyManager, under Message, click Manual Repair. All relations and dimensions in the sketch appear under Conflicting Relations/Dimensions.
2. Select each relation or dimension to highlight it in the graphics area. For example: …
3. Click Delete. Valid solution found. …
4. Click .

How do I delete part of a sketch Onshape?

StepsCopy link

1. Tap Delete part tool.
2. Select the part or surface to delete (you are able to select in the graphics area or in the Feature list).
3. Tap the checkmark.
4. Notice that the deleted part or surface is no longer listed in the Feature list, and a new Feature appears, Delete Part.

How do you fix a sketch that could not be solved Onshape?

You can rectify this by selecting the point that ends the pattern and the center of the circle and choosing coincident. This will constrain these points to be the same place.

Where is sketch error in Solidworks?

To check a sketch:

1. In an open sketch, click Tools > Sketch Tools > Check Sketch for Feature.
2. For Feature Usage, select Base Revolve. …
3. Click Check. …
4. Delete the highlighted line.
5. Click Check again. …
6. Delete the highlighted line.
7. Click Check again. …
8. Trim one end of the line and extend the other end.

What is rebuild error in Solidworks?

Some common rebuild errors include: Dangling Dimensions or Relations. Dimensions or relations to an entity that no longer exists. Features that cannot be rebuilt, such as a fillet that is too large.

How do I get my solidworks toolbar back?

To display SOLIDWORKS toolbars:

1. Right-click in the window border and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do you delete a sketch?

In TOTAL for Mobile, you can easily delete a single item or an entire sketch.

…

To delete an item or items from your sketch:

1. In a sketch, tap the Modify icon ( ) to enter Modify Mode. …
2. Now, select the item you wish to delete.
3. Finally, press the Delete key on your keyboard to remove the selected item.

What are the steps to delete a portion of the drawing?

To erase a selected part of a drawing, click the Select tool (the top-right button on the toolbar) and drag the mouse across part of your drawing. Press the Delete key to remove the selected part of the drawing.

How do you constrain parts to a sketch in Inventor?

To constrain a component to sketch geometry:

1. On the ribbon, click Assemble tab Relationships panel Constrain .
2. In the dialog box, click the button for the type of constraint you want to add.
3. Click First Selection, and then select the first face, curve, plane, or point.

How can you remove a constraint?

To delete a check constraint

1. In Object Explorer, expand the table with the check constraint.
2. Expand Constraints.
3. Right-click the constraint and click Delete.
4. In the Delete Object dialog box, click OK.

What does it mean when a sketch is over constrained?

The degrees of freedom affected by the current action are fully defined in the sketch with constraints and/or dimensions. By adding another dimension or constraint, violates or contradicts existing constraints or dimensions. This produces the overconstrained condition in the sketch.