Can a open sketch be extruded in Solidworks?

Can you extrude an open sketch?

Extrude Cut – Thin Feature



Thin features often use open sketches but can also use closed sketches. The thin features option gives the sketch a cut thickness and an extrusion depth as seen below in figure 1.

Can you extrude a sketch in an assembly solidworks?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you make an extrusion in Solidworks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

Can you extrude a 3D sketch solidworks?

You can create extruded surfaces from models that include 2D or 3D faces and knit the extruded surfaces to surrounding features. Click Insert > Surface > Extrude.

How can you extrude a sketch equally in both direction from the sketch?

Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

How do you sketch a part in assembly in Solidworks?

To create a layout:

1. Open a new assembly.
2. In the Begin Assembly PropertyManager, click Create Layout. A 3D sketch opens, and Layout appears in the FeatureManager design tree.
3. Create sketch entities and group related entities into blocks.
4. Close the blocks and the sketch.

How do you make a part in sketch in assembly in Solidworks?

Creating a Part in an Assembly

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ). …
4. Construct the part features, using the same techniques you use to build a part on its own.

What is extruded boss in SOLIDWORKS?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you copy a sketch in SOLIDWORKS?

To copy and paste a sketch:

1. Select the closed sketch in the FeatureManager design tree.
2. Click Edit > Copy or press Ctrl+C.
3. Click in the sketch or document where you want to paste the center of the sketch.
4. Click Edit > Paste or press Ctrl+V.

How do you make a plane in SOLIDWORKS?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

How do you specify the direction of extrusion for a 3D sketch in SolidWorks?

You can specify extrude direction with 2D and with 3D sketches by specifying a direction vector as the Direction of Extrusion.

…

Example: Specifying the Direction of Extrusion.

How do you make a 3D sketch in SolidWorks?

To create a 3D sketch, click 3D Sketch (Sketch toolbar) or Insert > 3DSketch . You can create 3D sketch entities on a working plane, or at any arbitrary point in 3D space. In 3D sketching, a graphical space handle helps maintain your orientation while you sketch on several planes.