How do I change the extrude depth in Solidworks?

How do I edit extrusion in Solidworks?

To edit the definition of a feature:

1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
2. Edit the definition in the dialog box by specifying new values or options.
3. Click OK to accept the changes.

How do I change the extrude size in Solidworks?

Double click the (extruded, revolved, etc.) part, then change the dimensions that’ll appear. 2. Click on the arrow before the (extrusion, revolve, etc.)

What is extruding in Solidworks?

You can extrude base features and other features using Convert to Extrusion (2D to 3D toolbar) with partial sketches. Extruded Boss/Base on the Features toolbar accepts only complete sketches.

How do you move a cut extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.

How do you edit an extrude?

Edit an Extrusion

1. In the drawing area, select the extrusion.
2. If you are in the project environment: …
3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
4. If desired, modify the extrusion profile.
5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.

How do I edit a dimension in Solidworks?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box.

How do I modify a feature in Solidworks?

To edit the definition of a feature:

1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
2. Edit the definition in the dialog box by specifying new values or options.
3. Click OK to accept the changes.

How do you undo extrude boss in Solidworks?

Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.

How do you remove 3d sketch in Solidworks?

To delete the picture: Right-click the picture and click Delete. Search ‘Deleting Sketch Pictures’ in the SOLIDWORKS Knowledge Base.

What are the options used in extrude to define depth?

Blind—Extrudes a section from the sketching plane to the specified depth value. Specifying a negative depth value flips the depth direction. Symmetric—Extrudes a section on each side of the sketching plane by half of the specified depth value. To Next—Extrudes a section to the next surface of a solid.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you move extrude?

Boss Extrude can be move by two methods.

…

1. Select the Boss Extrude from feature tree.
2. Right click on it and select edit sketch.
3. Now, edit the sketch as per your requirement.
4. Close the sketch. Remove unwanted lines, arcs and splines carefully.
5. Exit the sketch.
6. Boss extrude is automatically updated.

What does thin feature do in Solidworks?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.