Your question: Where is base flange in Solidworks?

What is base flange SolidWorks?

A base flange is the first feature in a new sheet metal part. When you add a base flange feature to a SOLIDWORKS part, the part is marked as a sheet metal part. Bends are added wherever appropriate, and sheet metal specific features are added to the FeatureManager design tree.

How do you use the base flange tab in SolidWorks?

Using a Base Flange to Add a Body

1. In a sheet metal part, click Base Flange/Tab. …
2. Draw a sketch on the plane containing the edge where you want to place the body.
3. Exit the sketch.
4. In the PropertyManager, under Sheet Metal Parameters, clear Merge result.
5. Click .

How do I add a flange in SolidWorks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

Where is the sheet metal tab in SOLIDWORKS?

Creating Tab Features



Create a sketch on a plane or planar face that meets the sheet metal tab requirements. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Base Flange . The tab is added to the sheet metal part.

How do I get my SOLIDWORKS toolbar back?

To display SOLIDWORKS toolbars:

1. Right-click in the window border, click Toolbars, and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do you make a flange?

Here’s some advice on flange preparation.

1. Step 1: Inspection. Examine both flange faces carefully for damage like cracks, dings, burrs and radial scoring. …
2. Step 2: Clean the Mating Faces. It’s common for traces of the old gasket to remain on the flange surfaces. …
3. Step 3: Preparation. …
4. Do it once.

How do you put a flange on Sheet Metal?

Create Flange along Edge or Edge Loop



On the ribbon, click Sheet Metal tab Create panel Flange . Do one of the following: To create flanges along edges, click Edge Select Mode, and then select one or more edges. To create flanges around an edge loop, click Loop Select Mode, and then select a loop.

How do you use a swept flange?

Creating Swept Flanges

1. Sketch an open, non-intersecting profile on a plane or face.
2. Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. …
3. Click Swept Flange. …
4. In the graphics area: …
5. Set options in the PropertyManager, then click .

What is Sheet Metal in SOLIDWORKS?

Sheet metal parts are made with a constant thickness. They start out as one flat sheet and then are cut and bent to make the final product. When it comes to creating a sheet metal part in SOLIDWORKS you have two choices for the first step: converting to sheet metal or building up from a base.

How do you change to Sheet Metal in SOLIDWORKS?

To convert a solid part to a sheet metal part:

1. Create the solid part.
2. Click Convert to Sheet Metal (Sheet Metal toolbar) or Insert > Sheet Metal > Convert To Sheet Metal .
3. In the PropertyManager, under Sheet Metal Gauges, set options if you want to use a gauge table: …
4. Under Sheet Metal Parameters: