Your question: How do you lock a part in SolidWorks?

What does the lock mate do in SolidWorks?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

How do you lock a part in place in SolidWorks assembly?

Locking and Breaking External References

1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
2. Click External References. …
3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
4. Click OK.

How do you lock an angle in Solidworks?

Locking Dimensions

1. In an open sketch, click Smart Dimension. …
2. Click the items to dimension.
3. Move the pointer. …
4. Right-click to lock. …
5. Move the pointer around until the dimension is correctly located.
6. Click to place the dimension.
7. Set the value in the Modify box and click .

How do I turn on the freeze bar in Solidworks?

To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar.

How do you Unfix a component in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.