Your question: How do you create a plan in SOLIDWORKS?

How do you create a sketch plane in Solidworks?

To add a 3D sketch plane:

1. Click 3D Sketch (Sketch toolbar) or Insert > 3D Sketch.
2. Do one of the following: Click Plane (Sketch toolbar) or Tools > Sketch Entities > Plane to display the Sketch Plane PropertyManager.

What is a plane in Solidworks?

SolidWorks provides Front, Top, and Right planes as defaults. The orientations (Front, Top, Right, and so on) relate to these planes. Planes are used for sketching and for creating geometry for features. You can create reference planes in addition to the default planes, and you can open sketches on planar model faces.

How do you show planes in SOLIDWORKS?

You can turn the display of planes on or off. To toggle the display of planes: Click View > Hide/Show > Planes.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do you make a cone in Solidworks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –

How do I project a sketch to a surface in Solidworks?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

What is solidworks boss?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

How do you show the Display pane in Solidworks?

To expand or collapse the Display Pane:

1. Click. at the top of the FeatureManager design tree (to the right of the tabs) to expand the Display Pane. The Display Pane appears to the right of the FeatureManager design tree pane:
2. Click. to collapse the Display Pane.

How do you make an angled line in Solidworks?

To create an angular dimension between two lines:

1. In an open sketch, click Smart Dimension (Dimensions/Relations toolbar) or Tools, Dimensions, Smart.
2. Click one line.
3. Click the second line.
4. Move the pointer to show the angular dimension preview.
5. Set the value in the Modify box and click .
6. Click to place the dimension.

How do you create an offset plane in Solidworks?

To create an offset plane, select the Reference Geometry drop down on the CommandManager and choose the Plane option. Once the option to create a plane is open, select a face or another plane and set a distance for the offset.