Contents
Which command is used to remove the material along the path in Catia?
The Remove command lets you modify one or more features by removing a shape from it. The shape can be a prism, a sweep, a revolve, a thick surface or the shape of an external body or surface.
How do I turn my surface into a solid in Catia?
How to convert enclosed surface to solid in CATIA?
- First of all join all the surfaces to which the solid has to be created.
- Go to Partdesign workbench.
- Select the surface and select the closed surface from the Surface based features.
- Then click on the ok button.
- Hide the surface to see the solid part.
How do I replace surface in Catia?
Replacing Faces
- Click the Replace Face icon .
- Select the horizontal face on the left. This face, which is the replacing face is now displayed in blue. …
- Select the horizontal face on the right. Three tangent faces are selected as the faces to be replaced and are shown in purple:
- Click OK to confirm the operation.
How do you simplify the surface in Catia?
About selection:
- Select the product to you want to simplify (i.e. Product1) in the specification tree or in the geometry area.
- Click Simplification in the DMU Optimizer toolbar. …
- Enter the desired value in the Accuracy field for instance 5mm.
- Click Preview . …
- Click Save . …
- Click Save in the Save As dialog box.
- Click Close .
How do I remove multi section solid in Catia?
Creating Removed Multi-sections Solids
- Select Closing Point 2 as shown on Section 2 to redefine the closing point.
- Click Closing Point 2 arrow to reverse the direction. It is possible to edit the feature reference elements by first selecting a curve in the dialog box list then choosing a button to either:
Where is the thick surface tool in Catia?
Open the ThickSurface1. CATPart document. Select the surface you wish to thicken, that is the extrude element. Click Thick Surface .
Where is open surface in Catia?
Click Connect Checker Analysis . Select both surfaces to be analyzed. Click Surface-Surface Connection in the dialog box and Projection option in the Connect Checker analysis dashboard.
How do you fill a shell in Catia?
Creating Fill Surfaces
- Click Fill in the Surfaces toolbar. …
- Select curves or surface edges to form a closed boundary. …
- Select the Continuity type to specify it between any selected support surfaces and the fill surface.