You asked: What is parting surface in SolidWorks?

How do I use the parting surface in SolidWorks?

Manual Mode for Parting Surfaces

1. Click Parting Surfaces (Mold Tools toolbar).
2. Click Insert > Molds > Parting Surface.
3. Select a Parting Surface feature in the FeatureManager design tree and click Edit Feature .

What is flat parting surface?

Parting surface having only one plane is termed as Flat parting surface. The position of the parting surface will therefore be at the top of the moulding. Non-flat parting surface. Parting line which lies on a non-planar or curved surface termed as non-flat parting surface.

What is shut off surface in SolidWorks?

A shut-off surface closes up a through hole by creating a surface patch along a parting line or edges that form a continuous loop. You can create shut-off surfaces before or after you create parting lines in a model.

What are parting surfaces?

A parting surface is a surface in the model that you designate to split a workpiece, die block, or another volume. A parting surface is made up of a set of features, with the first feature called the base quilt. Any additional features that you create using operations such as trim, merge, and extend are called patches.

What is parting surface and types?

It is a line that splits the mold into two parts – the core and the cavity. The concept of a parting surface is similar. A parting surface is a surface that separates the mold block into two parts – the core and the cavity.

What is parting surface and its types?

Definition of Parting Surface



Designed for the removal of the plastic product and the cold slug, the parting surface is where the core meets the cavity, and usually locates at the largest section of a product.

What is mold shut off?

Shut-offs are powerful tools that allow creative designers and engineers to solve difficult tooling and design issues using drafted walls sealing against drafted walls, eliminating the need for post-molding machining or the need to remove functional geometry.

How do I remove a redundant loop in Solidworks?

Right-click a selected loop in the graphics area and choose De-select Loop to remove it from Edges .

How do you find a parting line?

The parting line of a die cast component represents where the two different sides of the mold come together. This line often (but not always) marks the border between the inside and outside of the part. The location of the parting line indicates which side of the die is the cover and which is considered the ejector.

How do you do a parting line analysis?

To perform an analysis:

1. Click Parting Line Analysis. (View toolbar) or View > Display > Parting Line Analysis.
2. Click View > Modify > Parting Line Analysis.
3. Click Parting Line Analysis. (View toolbar) or View > Display > Parting Line Analysis.

What is parting line in plastic parts?

A ‘parting line’ is the line of separation on the plastic part where the two halves of the plastic injection mold meet. The line actually indicates the parting ‘plane’ that passes through the part.