You asked: How do I use the sweep tool in Revit?

How do you make a sweep blend?

Create a Swept Blend Form

1. Draw a line to form a path.
2. Click Create tab Draw panel (Point Element) and place reference points for the swept blend profiles along the path.
3. Select a reference point and draw a closed profile on its work plane.
4. Draw profiles for the remaining reference points.
5. Select the path and profiles.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do you create a spline in Revit?

Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Spline), and place the cursor in the drawing area. Click to specify the start point for the spline. Move the cursor and click to specify the next control point on the spline. Repeat as necessary.

Does sweep mean?

1 to clean or clear (a space, chimney, etc.) with a brush, broom, etc. 2 often foll by: up to remove or collect (dirt, rubbish, etc.)

How do you do a sweep in Solidworks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.