Where would you create a projected view in Fusion 360?

How do I create a projected view in Fusion 360?

From the ribbon, select Projected View. When you are prompted to select the parent view, click the base view. Move the cursor above, and then to the left, and then to the right of the base view. As you do, a preview shows you the projected model if you select that relative position for the projected view.

How do I move projected view in Fusion 360?

Solution: Hold the “Shift” key as the section view is placed. This will allow the view to be moved out of alignment from the parent view.

What is a base view in Fusion 360?

In the Drawing workspace in Fusion 360, you can use the Base View command to create a base view of a design. A base view is the first drawing view that you place on a sheet. A base view is a direct projection of the 3D design, viewed from a specific direction.

What is a projected view in Solidworks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

In what ways can you create a standard 3 view?

The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.

How do you freely move a section view in Solidworks?

To move a drawing view, use one of the following methods:

1. Click and drag an entity (including edges, vertices, cosmetic threads, and so on). …
2. Select a drawing view, then move (nudge) it with the arrow keys. …
3. Press Alt, place the pointer anywhere in the view, and drag the view.

How do you move sections in Civil 3D?

In the Prospector item view, select the section views that you want to move. Right-click Move To Section View Group. Note: This command is also available on the context menu after you select a section view in the drawing and on the Section View ribbon.

What is Zebra analysis?

The zebra analysis tool projects stripes onto a surface so that you can inspect the continuity between surfaces. Surface continuity is a measure of how smoothly two surfaces flow into each other.

What does the concentric constraint do to sketch geometry in Fusion 360?

The next constraint is “concentric,” which forces circular sketch elements, such as circles and arcs, to share a common center point.