What is thread in Solidworks?

How do I use thread feature in Solidworks?

The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread. Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set.

Where is thread in Solidworks?

Creating a Cut Thread

1. Open a part file. The diameter of the cylinder is 6mm. …
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: …
5. Under Thread Location: …
6. Under End Condition, click Maintain Thread Length. …
7. Click .

How do you create threads in Solidworks?

Start by creating a cylindrical extrusion or cylindrical hole, much like the initial steps to of making a cosmetic thread. The feature size should be the same as the nominal thread diameter. From there, select the starting edge. Then, click “Insert” then “Feature” and “Thread.” This will automatically create a thread.

How do you show threads in Solidworks drawing?

To insert cosmetic threads from assembly documents into drawings, click Insert > Model Items and click Cosmetic thread . In drawings, Insert Callout appears in the shortcut menu.

What is thread feature?

The Thread Feature allows you to place a custom profile as an associative thread on a selected cylindrical face. This provides the ability to create real threads based on custom profiles that update if the size of the cylindrical face is updated.

How do you create a thread?

How to Create a Twitter Thread

1. Open the Twitter website or the official Twitter app on your iOS or Android device.
2. Tap the compose icon to begin a new tweet. …
3. Type your first tweet as usual. …
4. Select the blue + icon in the lower-right corner.
5. Type your second tweet. …
6. Repeat until you’ve finished your Twitter thread.

How do you read thread size?

Thread sizes are given in nominal sizes, not in the actual measurement. The exact measurement is slightly below the named or nominal size. For example, a 6mm bolt may measure 5.8mm or 5.9mm, but it is called 6mm bolt. It is also common to use “M” before the bolt size, such as M6 for a 6mm bolt.

What is screw thread size?

Diameter is also known as screw size. For those with a diameter smaller than 1/4″, screw size is indicated by a number (e.g., #10 or No. 10). For example, a 10-24 screw has 0.190″ thread diameter and has 23 threads per inch.

How do you cut a thread in Solidworks?

Creating a Cut Thread

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location:

What are standard thread sizes?

Standard Thread Pitch Chart

What is cosmetic thread?

Cosmetic threads describe the attributes of a specific hole so you need not add real threads to the model. A cosmetic thread represents the minor (inner) diameter of a thread on a boss or the major (outer) diameter of a thread on a hole and can include a hole callout in drawings.