What is the function of fillet in SolidWorks?

What does the fillet feature do?

Fillet feature dialog box



Adds fillets or rounds to one or more edges of a part, between two face sets, or between three adjacent face sets.

What is a fillet edge?

A fillet is a sharp-edge-breaking feature that specifically adds a radius, either concave or convex, to the interior corner of a part. A fillet differs from chamfers and bevels because they don’t have a radius. A chamfer is typically a 45-degree angle added to the edge of a feature design.

How do you fillet a 3D object in Solidworks?

To fillet multiple edges of a 3D solid using the Chain option:

1. Click Solids > Solid Editing > Fillet edges (or type FilletEdges).
2. Specify the Radius option.
3. Specify the radius of the fillet arc.
4. Specify the Chain option.
5. Specify an edge tangent to an existing fillet on a 3D solid. …
6. Press Enter.

What is sketch fillet in Solidworks?

The Sketch Fillet tool trims away the corner at the intersection of two sketch entities to create a tangent arc. This tool is available for both 2D and 3D sketches. The Fillet tool on the Features toolbar fillets entities such as edges in parts.

What are the fillet types in Solidworks?

Types of Fillets

How do you face fillet in Solidworks?

To create a face fillet between surfaces:

1. Create two surfaces (the surfaces need not be adjacent).
2. Click Fillet (Features toolbar) or Insert > Surface > Fillet/Round.
3. In the PropertyManager, under Fillet Type, select Face fillet.
4. Under Items To Fillet, set a Radius value.

What is fillet tool?

The Fillet tool adds a highly specific fillet (arc) between two objects in the drawing, making each of the fillet’s end points tangent to one of the objects. Apply fillets to lines, rectangles, polygons, polylines, circles, circular arcs, NURBS curves, 3D polygons, and walls.

What is the purpose of the fillet radius?

By definition a Fillet Radii is a rounding of an interior corner and are employed on castings to increase their load bearing strength and to improve both manufacturability and quality. For those reasons a fillet radius should be a standard allowance on every casting design.

What is fillet in architecture?

fillet, (from Latin filum, “thread”), in architecture, the characteristically rectangular or square ribbonlike bands that separate moldings and ornaments. Fillets are common in classical architecture (in which they also may be found between the flutings of columns) and in Gothic architecture.

What does the Shell feature do in Solidworks?

The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model . You can also shell a model using multiple thicknesses.

What are the four types of fillets?

Circular, conic Rho, Conic Radius and Curvature Continuous are all available choices.

What is the difference between a chamfer and a fillet?

Fillets describe rounded corners of a design (or part) that help to reduce stresses and prevent rapid deformation at the corners of the part. In contrast, chamfers are sloped or angled edges (usually at 45° or 60° ) of a design or part.