What is Edge command in AutoCAD?

What is edge method in AutoCAD?

Selects the hidden edges of all 3D faces in the drawing and displays them. If you want to make the edges of the 3D faces visible once again, use the Edge option. You must select each edge with your pointing device to display it.

How do I use the edge command in AutoCAD?

The steps are listed below:

1. Type FILLETEDGE on the command line or command prompt and press Enter.
2. Type R or radius on the command line.
3. Press Enter.
4. Type 1 (radius value).
5. Press Enter.
6. Select the Edge to apply Fillet on it. Here, we have selected the edge, as shown below:
7. Press Enter.

What is extract edges command in AutoCAD?

Creates wireframe geometry from the edges of a 3D solid, surface, mesh, region, or subobject. Find. With the XEDGES command, you can create wireframe geometry by extracting all the edges from the following objects: 3D solids. 3D solid history subobjects.

What are the five commands of AutoCAD?

The Five Most Useful AutoCAD Commands

• Line: Enter line or l to the command prompt. AutoCAD will ask for first point. …
• Circle: Enter circle or c to the AutoCAD command prompt. …
• Rectangle: Enter rectangle or rec to the command prompt. …
• Trim: Enter trim or tr to AutoCAD command prompt. …
• Hatch: Enter hatch to command prompt.

What are commands in AutoCAD?

Basic AutoCAD commands

What is Donut command in AutoCAD?

A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters. If you specify an inside diameter of 0, the donut is a filled circle.

How do I use chamfer edge in AutoCAD?

To Chamfer a 3D Solid

1. Click Solid tab Solid Editing panel Chamfer Edge. Find.
2. Select the edge to chamfer. A preview of the chamfer is displayed.
3. Do one of the following: …
4. Specify the distances for the base surface and the other, adjacent surface. …
5. Do one of the following: …
6. To complete the chamfer, press Enter.

What are the 2D commands?

Commands for 2D Isometric Drawing

• DSETTINGS (Command)
• ELLIPSE (Command)
• GRID (Command)
• ISODRAFT (Command)
• ISOPLANE (Command)
• ORTHO (Command)
• SNAP (Command)

What is mirror in AutoCAD?

The mirror command in AutoCAD is used to create a copy (mirror copy) of the selected object. We can also delete the source object after mirroring the object. The objects that represent the same as the half of their object can be mirrored across a center line to create the other half of the object.

What is array in AutoCAD?

The array is the command used to draw multiple copies of an object in a particular pattern or order. We can also manage the distance between the objects in the array. The shortcut key for Array is AR. To implement an array, we can type Array or AR on the command line and then press Enter.