What is cut geometry in Revit?

How do you cut a Geometry wall in Revit?

On the Modify ribbon, in the Geometry panel, click Cut Geometry. Revit prompts you to select the geometry to be cut. Click to select the wall. Then Revit prompts you to select the void geometry to cut.

How do you cut an object in Revit?

When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel Trim drop-down (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend.

How do you cut a Geometry roof in Revit?

Use the “Cut geometry” command and select first the roof than the void.
…
Another method would be to edit the roof boundary line to get the appropriate cut:

1. Ideally in a floor plan view create model lines on the “cut edge” of the 2 roofs.
2. Select the roof in that you need to create the cut and choose “Edit roof”

What does cut with voids when loaded mean in Revit?

“Cut with Voids When Loaded: When selected, voids created in the family will cut through solids. The following categories can be cut by voids: ceilings, floors, generic models, roofs, structural columns, structural foundations, structural framing, and walls.”

How do you trim intersecting lines in Revit?

click Modify tab Modify panel (Trim/Extend Multiple Elements). Select the reference to use as a boundary. Then select each of the elements to trim or extend. For any elements that cross the boundary, the part that you click is retained.

How do you do trim and extend in Revit?

One is a single trim/extend and the other allows you to trim or extend multiple items. These can be found under the tab Modify.
…
Procedure

1. Select the trim extend multiple command.
2. Select the item to trim or extend to.
3. Select the items to be trimmed or extended.

How do you do cut in Geometry?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you cut the roof overhang in Revit?

When editing the footprint of a roof, modify properties of its boundary lines to change the roof overhang.
…
Change the roof overhang

1. In sketch mode, select a boundary line for the roof.
2. On the Properties palette, enter a value for Overhang.
3. Click (Finish Edit Mode).

How do you cut a solid solid in Revit?

Solid forms will only cut the following solids: Form elements.
…
Family instances inside of the massing editor.

1. Create two adjacent solid forms. …
2. Click Modify tab Geometry panel (Cut).
3. Select the solid form to be cut.
4. Select the cutting solid form.

Why is my void extrusion orange?

“When you create a void form while in the Family Editor, it will appear in the 3D views as a transparent form and as orange lines in plan and elevation views, as long as it is not cutting any solid geometry.” So, if it’s not cutting anything, then it’ll be orange.

How do you cut out a void extrusion in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.