What are end conditions in SolidWorks?

What is a blind end condition in Solidworks?

Blind. Extends the feature from the sketch plane for a specified distance. Through All. Extends the feature from the sketch plane through all existing geometry.

How do you extrude a plane in Solidworks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do I enable normal to in Solidworks?

From an open model or 3D sketch, with nothing selected, press the spacebar. From the Orientation dialog box, click Normal To .

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

What is a boss in Solidworks?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

How do you extrude a face in SolidWorks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

What is a mid plane extrusion?

Up to Body: Extends the extrusion to the solid body you define. Mid Plane: This is similar to the blind in that you define the distance numerically, however, it keeps the sketch plane centered around the extrusion. Half of the distance will go one way, while half of the defined distance will go the other way.

How do you view a plane in SolidWorks?

Activate View Planes by doing one of the following:

1. Click View > Hide/Show > Planes.
2. In the Heads-up View toolbar, click Hide/Show Items > View Planes.

How do you orient a view in SolidWorks?

To display the Orientation dialog box, do one of the following:

1. Click View Orientation (View toolbar).
2. Click View > Modify > Orientation.
3. Press the Space Bar.
4. Right-click in a drawing sheet and select Zoom/Pan/Rotate > View Orientation.

What does thin feature do in Solidworks?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is a vertex in Solidworks?

Control vertices are similar to spline points. They help you manage the shape of the curve. You can add dimensions between control vertices and add relations. To insert a control vertex: In an open sketch, right click anywhere on the control polygon and select Insert Control Vertex .