Quick Answer: What is pattern and define its types in SolidWorks?

What are the types of pattern in Solidworks?

Types of Patterns

• Curve Driven Patterns and the Curve Driven Pattern PropertyManager. …
• Linear Patterns and the Linear Pattern PropertyManager. …
• Circular Patterns. …
• Sketch Driven Patterns. …
• Table Driven Patterns. …
• Saving and Loading Table Driven Patterns. …
• Mirror Feature. …
• Fill Patterns.

What are the type of pattern in Solidworks assembly?

For assembly holes and cuts, you can create linear, circular, table driven, and sketch driven patterns.

What does the pattern command do in Solidworks?

The Linear Pattern Command is used to drive features, faces, or bodies in a linear direction. This feature helps save time by cutting down the repetitive movements of adding a bunch of holes or other forms of geometry.

How do you create a pattern in Solidworks?

To create a linear sketch pattern:

1. In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Set values for Direction 1 (X-axis). …
4. Repeat for Direction 2 (Y-axis). …
5. Click .

What are the type of pattern present in sketch design?

Using sketch points within a sketch, you can specify a feature pattern. The seed feature propagates throughout the pattern to each point in the sketch. You can use sketch driven patterns for holes or other feature instances. Using X-Y coordinates, you can specify a feature pattern.

Where is features to pattern SolidWorks?

Feature Driven Pattern

• Click Insert, Component Pattern, Feature Driven.
• Select the seed components for Components to Pattern .
• Click in Driving Feature and select the pattern feature in the FeatureManager design tree or a face of a pattern instance in the graphics area.

What is a local pattern solidworks?

You can create patterns of components in assemblies in several ways. You can create a local linear or circular pattern of components. You can use a component, in addition to a feature, to drive a pattern driven pattern. The component can be in the same assembly or within a subassembly.

How do you use the circular pattern feature in Solidworks?

Use circular patterns to create multiple instances of one or more features that you can space uniformly around an axis.

…

To create a circular pattern:

1. Create one or more features to replicate.
2. Click Circular Pattern (Features toolbar) or Insert > Pattern/Mirror > Circular Pattern.
3. Set the PropertyManager options.
4. Click .

How do you make a linear component pattern in Solidworks?

To create a linear pattern of components:

1. Click Linear Component Pattern (Assembly toolbar) or Insert > Component Pattern > Linear Pattern.
2. In the PropertyManager, specify options under Direction 1: …
3. Repeat for Direction 2 for a bidirectional pattern. …
4. Click in Components to Pattern , then select the seed components.

Which is an example of a linear pattern?

A linear number pattern is a sequence of numbers where the difference between every term is the same. An example of this is 1, 3, 5, 7, 9, … There is a difference of 2 between every term. These numbers are also called linear numbers.

How do you cut a pattern in SolidWorks?

Step 1: Select Linear Pattern and choose the axis that you wish the pattern along the axis. Step 2: Select the Features and Face, in this case which is the extrude cut in the part. Step 3: Check the box “Instance to Vary”. Step 5: We will need to change the increment of the length and width of this cut.

What does pattern seed only mean?

Pattern seed only. Creates a linear pattern in Direction 2 using the seed features only, without replicating the pattern instances of Direction 1. Pattern seed only option selected. The seed feature only is replicated in Direction 2.

How do I create a variable pattern in SolidWorks?

To create a variable pattern across a planar or nonplanar surface:

1. In a part document, click Variable Pattern (Features toolbar) or Insert > Pattern/Mirror > Variable Pattern . …
2. In the PropertyManager, for Features to Pattern , select the features to pattern in the graphics area or flyout FeatureManager design tree.