Quick Answer: What is driven dimension in Fusion 360?

What is a driven dimension?

Driven dimensions are used by Creo Parametric to measure the size and shape of features within a model. The value of a driven dimension changes when the size and shape of the features are modified. Driven dimensions can have tolerances, to which manufactured components can be accepted or rejected.

What is the difference between driven and driving dimensions?

The driving dimensions are the values that were directly input into BikeCAD. For example, head angle and seat angle can be directly specified through text fields in BikeCAD. The driven dimensions are calculated by BikeCAD. Driven dimensions will change as a result of changes to driving dimensions.

What is a driven dimension Onshape?

September 2018 in Using Onshape. Are driven dimensions just for saving the trouble of consulting a calculator or is there more to them. Referring here to driven dimensions within sketches, not drawings. The value of adding reference dimensions onto a shop drawing is clear, but why within sketches? Michael.

What is a driven dimension in Inventor?

A driven dimension is a reference parameter that reports a measurement value for the associated geometry. It does not define or drive the geometry and therefore cannot be directly edited. Driven dimensions are created in two ways, by: Adding a dimension to fully-constrained geometry.

What is driven dimension in Solidworks?

If you dimension a closed-profile sketch that would cause an over defined sketch, the dimension is automatically changed to driven.

How do you assign parameters in Fusion 360?

Learn how to create parameters and use the Change Parameters command edit parameters in your Fusion 360 design.

1. In an active sketch, press the D key to start the Dimension command.
2. Select the sketch geometry to dimension.
3. Drag and click to place the dimension. …
4. Enter a name and value or expression for the parameter.

How do you make a dimension not driven in Solidworks?

Look for other dimensions or relations that you can delete or change. Select Don’t ask again to suppress this dialog box. The option you last used will apply by default. Use the right-click menu Driven option to toggle between dimension driven and dimension driving.

How do you delete a driven dimension in Solidworks?

To delete a SOLIDWORKS Sketch Dimension you typically select the dimension and hit Delete. To edit the value of the dimension you would double-click on the value to open the Modify dialog.

How do you set dimensions in fusion?

Edit your sketch, then click the Sketch drop down menu and click Sketch Dimension, then click on the dimension line you want to edit, move the mouse to show the dimension and click again to fix it to the sketch. You can now change the dimension to what you want.