Quick Answer: How do you use the edge flange in Solidworks?

What is an edge flange?

You can add edge flanges to one or more edges. General edge flange characteristics include: Thickness is linked to the thickness of the sheet metal part. Sketch line of the profile must lie on the selected edge.

What is difference between Miter flange and edge flange?

Edge Flange: Combines a bend and sheet metal tab in a single operation. User selects the desired edge, bend radius, angle, flange length, and flange position. Miter Flange: Allows the user to add multiple flanges to one or more of the edges of the sheet metal part.

How do you bend sheet metal in SolidWorks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

How do you use a swept flange?

Creating Swept Flanges

1. Sketch an open, non-intersecting profile on a plane or face.
2. Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. …
3. Click Swept Flange. …
4. In the graphics area: …
5. Set options in the PropertyManager, then click .

What is a miter flange?

A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.

How does sheet metal work in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

What is sheet metal flange?

A flange feature consists of a face and bend connected to an existing face along a straight edge. To add a flange feature, you select one or more edges, and specify the size and position of the material added.

How do you expand sheet metal in SolidWorks?

Click Closed Corner (Sheet Metal toolbar) or Insert, Sheet Metal, Closed Corner. Select one or more planar faces for Faces to Extend .

…

1. Set a value for Gap distance .
2. Set a value for Overlap/underlap ratio .
3. Select or clear: Open bend region. Preview is not displayed when selected. …
4. Click OK .