Quick Answer: How do you measure point to point in Revit?

What is a point to point measurement?

A point-to-point measurement tool performs the measurement of the distance between the outside surfaces of the shoulders across the back of an individual, which is associated with tailoring custom clothing and utilized to determine both the top-of-sleeve points and used to assist in determining the sleeve length …

How do you measure distance in 3d in Revit?

To start the plugin, click on the 3DMeasure icon located in the Camilion tab, a dialog box will be displayed and you’ll be prompted to select 2 points. After clicking on the second point, the dialog box will be updated to reflect the distance between the 2 points and the delta of each coordinate pair.

How do you measure point to point in Autocad?

To measure point to point

1. Zoom out so you can see the points to measure.
2. Click (Point to Point).
3. Click the starting point, and then click the end point. The distance between the two points appears on the line between the points. …
4. To clear the most recent measurement, press Backspace.

What is a pit to pit measurement?

Armpit To Armpit



The most effective measurement is the pit to pit of a garment. This is taken by laying the garment flat, face up and measuring the cloth from its widest point from under the armpit to the other armpit.

How do you measure multiple lines in Revit?

However you can measure the total length of multiple model lines using the Measure Along An Element tool and TAB selecting the chain. So if you needed a quick total length you could select the detail lines > Convert Lines > Measure Along An Element > TAB > click chain.

How do I change dimension values in Revit?

Change a Dimension Value

1. Select an element that the dimension references.
2. Click the dimension value. If the dimension is locked, the lock control appears next to it. …
3. In the edit box, type a new value for the dimension, and press Enter . The element moves to satisfy the new dimension requirement.

How do you measure a pipe in Revit?

Length of a standard pipe can by read by Annotation Family and Pipe Schedule. To get the length of a pipe: Use Revit Pipe Category instead of the Generic Model. Place a Pipe Annotation Tag which contains a Length label to read the length property from a pipe.

How do you create a polyline in Revit?

Welcome to Autodesk’s Revit Architecture Forums.

…

This has helped me tremendously.

1. 1.In the “Modify” tab, create a new “Region” and call it Polyline.
2. In the “Edit Type” properties pallet, select “,No pattern>
3. Uncheck “Masking”
4. Click “Ok”