Quick Answer: How do you Extrude a sketch in Solidworks?

How do you extrude a drawing in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

How do you extrude a sketch in an assembly in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude an open sketch in Solidworks?

Allows you to use a partial sketch to create extrude features from open or closed contours. Select sketch contours and model edges in the graphics area.

Can you extrude an open sketch?

Extrude Cut – Thin Feature



Thin features often use open sketches but can also use closed sketches. The thin features option gives the sketch a cut thickness and an extrusion depth as seen below in figure 1.

Can you extrude cut in assembly?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you extrude Assembly in Inventor?

Click 3D Model tab Create panel Extrude . If there is only one profile in the sketch, it is selected automatically. Otherwise, select a sketch profile. Select the face, work plane, or surface from which to start the extrusion.

How can you extrude a sketch equally in both direction from the sketch?

Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

How do you extrude 3D sketches?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

How do you taper a part in Solidworks?

To extrude an entity with a taper angle:

1. Click Solids > Draw > Extrude (or type Extrude).
2. Specify the type of entities to create. Surface. …
3. Specify the entities to extrude and press Enter.
4. Specify the Taper angle option.
5. Specify the taper angle and press Enter.
6. Specify the extrusion height.

How do you extrude an object in Solidworks?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face: …
3. Select other faces to define the extrude as required. …
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you change extrude in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.